Viewing all customer Discussions for:

82-030 Sliding Patio Door Handle Set, 3-15/16"

I have a door handel which needs a replacement locking lever latch OR a total handle replacement. I do not see a manufacturer name or model number on the handle. The lock lever is on the side of the handle not on the front. Are you able ot determine the brand and model of the handle, and preferably ... (cont.)

Hi, I'm looking to replace the handle of this sliding glass door, MFGR: PHP-032-2 SERIES: 870 VINYL SLIDING GLASS DOOR, left-opening handle/door.

If I measured correctly the measurements are as follows;7x1 flat side of handle9 1/2 x 1 where curved handle isbetween the screws is - 3 9/16"from top if screws to bottom of screws 4 1/4not sure if I measured correctly. As per the picture the front side where the handle is broken where the screws a ... (cont.)

Hi The original handle from patio sliding door was lost during the renovation, we are looking for a replacement Maybe you can help us Please let me know if you need any more information

I don't see any names, numbers or markings unfortunately. Any help in finding the correct part is appreciated.

I'm wondering if this is too old, I am having trouble aesrching for the parts.

3inch and 3/4 from hole to hole

Hello. I need a new door handle / lock throw for my slider. I have provided tape measure pics showing dimensions and mounting screw to screw spacing. Can you please help me identify a proper replacement for this? Ideally I would like a white finish on the metal hardware, as per the factory unit. I h ... (cont.)

3 15/16 hole spacing. As noted in the photos, I need the latch to be about 2" down (or up) from the attachment screw holes.

Any idea what I need to replace this lock?

Can you tell me if you have the parts for the patio door handle?

The sliding door lock system is frozen. The latch and key are not able to move the internal locking system (mortise) to lock or unlock the door. The manufacturer of the sliding door is by Amerimax which I understand is not longer in business. The only numbers I can find was inside the handle part ... (cont.)

Could you identify the part that will fit in the door?

Series: insulate 460Type: sliding patio door CPD: PWG-M-126 Rating: SD-R30(DP+30/-30)-72x82 5755818 8 06-01-22 Nam-1-301414WSC5755818 8 06-01-22Hi I need to buy these part thank you!Sandra

I think these are 82-089 and 82-226. I'd like to confirm my search matches. In particular, I'm don't know if the finish of the latch matches what I see online. Also, the latch broke, so hopefully that is included with the handle.

I'm looking to replace the flat broken plate. The inner screws are almost 4 in apart and the outer screws that holds the handle are about 6 in apart. .

Do you offer the legacy handle set with the latch centered? I see there are two placements in the escutcheon and in the pictures the bottom one is cut out. But I need a version where the top one is cut out so that latch is centered on the escutcheon.

As inside handle part has been broken, I'd like to replace it.

The door handle on my interor sliding glass door is broken. There is a locking lever just under the handle plate. Info. CAN/CGSB-12-1M ANSI Z-97-1. 1984 SGCC 16CFR1201. 1/80 GOC 250. 60123303

I need help locating this part?