Viewing all customer Discussions for:

37-012 Pressure Shoe Pair

I am looking for some of these window pivots. The square base measures 1.25" and the post is 1.5" tall from the face of the base and 5/16" diameter. The bottoms side of the base is concaved. There are left and right hand pivots and I am looking for 20 of each. Please let me know if you can help. ... (cont.)

ISO a part for older windows from the 50's-60's. This is the top of the bottom in the track and glides a bit. Windows are push out.

I've attached some picture of what the existing hinge looks like. The building was probably built in the '60s. There's a plastic guide that is broken on a be side but I would assume the whole hinge would need to be replaced. On said guide there are some numbers that I'm just now seeing after I zoome ... (cont.)

Attached are two different brackets. The plastic bracket is from a tilt-out style window, metal frame. The metal bracket is from vinyl replacement windows that tilt in for cleaning. I have no numbers for either part. Please let me know if you carry either one of these brackets, or both. Thank y ... (cont.)

new to working on school windows and can not find an image to help identify parts like the plastic guide.

I have some bar guides or nylon slide that looks similar to 36-077. Do you have a product that looks like this? The rod that protrudes is about 1-1/2" long. The width is about 1-3/8" and the length is about 1-1/2".

this is required in left and right pairs for an awning casement window

Old Tilt in window missing a slide No name on the widow.

I need 6 tilt window pivot pins, teflon, attached is a picture of the needed part.S/ Richard

sorry i left wrong email address before

Please help! I have a customer with older aluminum sash that most of these guides are broken and cannot open windows properly

I get a lot of balances from Swisco. So when I need some friction shoes, I thought of you first. 5/16" pin 1-1/8" wide shoe 1-1/4" long shoe 1-1/2" long pin

Attached are images of the types of (common area) windows that we have at Ascension. Ascension Manor II was built in 1978 and according to the spec book is supposed to have EFCO projected type S-110 or approved equivalent windows. I need to have the plastic slider guides (I think that ... (cont.)

Pic "Hinge-pin 003" shows the part. The pin is broken off at the base. The dimensions are: Base dimensions:1 1/8 x 1 1/4 x 3/8. pin height above the flat: 1 1/8 including the 1/8" tip window are about 30 years old. The window pane has "Guardian" on it. No markings on the steel window fram ... (cont.)

Greetings, Please open the attachments. They will show a piece that came from a metal hopper type window. The window has a left and right side piece. Please ID and provide me with both sides. Thank you, Mike