Viewing all customer Discussions for:

39-013 Casement Window Operator, 13-1/2" Arm

I need several operators for Hurd windows installed in a house built in 1988. The windows are wood inside and out, casement type. I would like about six left and six right operators, depending on price. Details should be seen in the photos. Length from the tip of the arm to the center of the gea ... (cont.)

As you can see from one of the photos threaded crank shaft where the window crank handle is supposed to fit onto it, is completely missing. I would really like to replace that threaded part, but if that is not possible then I would like to replace the existing operator. Also this one has a square pl ... (cont.)

code 39-014 // 013 seems to be what I'm looking for. Your opinion?

Window glass marking: 4 5 84 8 MW Window Frame marking: WS IGCC 178 CBA This photo is of a Truth manufactured operator with 12" of arm which I can measure. A smaller arm runs perpendicular to the large arm and measure about 4".

Hello, I have two windows with Biltbest cranks. One is very hard to operate, the other is I think stripped as it just spins with no movement to the window. I think they original to the home that was built in 1969. What parts are needed? How to repair? Picture attached. Thank you in advance. ... (cont.)

Hi, I am looking for a replacement for the attached window operator (will need a few). The part has a backwards "L" followed by a 2 on one side on the back, and "LH" on the other.

I have a Caradco 1980 wood casement window and need a replacement crank operator . The orginal has a stamp on the inside with a part number 40055 LH ( left hand). Your 39-103 seems to be a correct replacement. Can you confirm

I was at your website looking for Caradco Crank that is 13-1/2", but could not find it on the website. Please help. I need one right arm and one left arm. I found fill part number is from parts. It is 358-1R and 358-1L. 40055 LH

What would you recommend for a replacement option for a Truth operator p\n 40056? Side note; I really like your site. The little things make a difference.

4 inches wide, arm is 12 inches long...the name on it is TRUTH...number is 45251

The Caradco casement window operator in one of my windows has cracked/broken and no longer works. These windows were installed in 1971 when the house was built. It appears to me that your part number 39-013 (13.5" arm) most closely resembles my broken operator which also has a 13.5" arm. Would ... (cont.)

do not have manufact name but number on bottom of control housing is 40055. see atached image. gears are stripped and need new unit thanks David....

I have a few older CARADCO windows with cranks not working. The main arm measures 9 inches and on the second arm is the ID number 30350 and 358-1R stamped. Cane you help me to find the right item to replace them please. I also add some pics Thank you very much Christian

cannot find this brand of window to replace parts. Ever hear of REUTEN?? Was hoping for some direction, or maybe you have a universal part that could help?

I have a single arm casement. The arm is 12 inches. What will work for,you replacements? Kevin

Wright #07701-00 in bronze 6 ea

I'm looking replacement operator. the unit is a Truth 45136 part number marked on the it. Can you recommend a replacement unit that will work please. It length is 13.5 inches and is white in colour. thanks Sam

Hi, Could you please help me identify the replacement window operator for Jeld-Wen window. D series Clad Case/Awn; JEL-N-555 It looks like the arm is 13 1/2", left Thank you. Peter

Flipping a house....I believe all my actuators that need replacing are of the same design / manufacturer. I did notice on the back side (see attached photo) that they are "truth" brand with a manufacturer # 40055 on the back. Please help me pick the correct models offered by Swisco. There migh ... (cont.)

Can you get me a replacement crank? The crank has the following stamps: U.S. PAT 4505601 PAT CANADA 1986 U.S. PAT 2135397 45002 MADE IN U.S.A.