Viewing all customer Discussions for:

39-017 Pan Am/Daryl Window Crank

Hello,Hoping you can help me find a replacement for this part

Hello, Purchased 39-017, and it doesn't seem to work. Do you have another option? Thank you.

The window operators seem to be incorrect—the windows don’t fully close. The original units appeared to have only four screw holes: two on the top and two on the bottom. It looks like the wider one was drilled to accommodate upgrades over the years but I could be wrong. How do I tell wh ... (cont.)

I'd love to be able to get some replacement parts for my 1960s original Pan Am windows. Especially these parts with the Pan Am label. Most of my windows are missing them and dirt gets in. Also interested in replacement cranks

Hand crank for 60+ year old house. Thank you.

I have not been able to identify the window manufacturer. No markings on the opener. I haven't removed the opener yet hoping to identify a replacement from the photos. It looks like the 39-017 might be correct? The other possibility is the 39-280? Thanks for any help

Hi, I am looking to identify and purchase some replacement awning window openers. I have attached some photos. Approx center-to-center dimensions: Top holes: 0.45" Bottom holes: 1.3" Top-to-bottom holes: 5.2" Both arm lengths: 2.5" Arm pivot hole: 0.275" The only markings visible are "Pat no D-198 ... (cont.)

I cannot figure out what I need to get

Pretty sure the window is made by WARE, Miami FL. Control box is about 5.5". The box is pretty much empty. The piece that connects to the window is missing

Hello, I'm trying to fix these old Pan Am windows. Do you have the cranks available? Also do you have a recommendation for a repair person who has experience with these type of windows near Palm Harbor Florida?

The length of crank is close to 6 inches. The window cranke up and out. 4 panels.

Need identification and if it's in stock

Hello,I was looking on your website and found Product Code: 39-025 as a possible replacement awning crank for one on my windows. However, it only has 1-screw hole at the top. Mine has 2-screw holes - please see attached photo (1.png). I need this particular one because is has the screw connector ... (cont.)

for lower hole to attach to arms it says 5/16-8 thread do you also carry the screws for need to attach the arms?? thank you.

I am looking for a right hand vintage Jalousie window crank. Photo enclosed. It is from the 50's and I haven't had any luck on ebay. Any help would be appreciated.

NO 198 U2 606 RD 1963 CAN

My crank looks different than others I've seen on your site. Small attaching arm is 2 & 3/16". The actuating arm coming out of the worm gear has a "crook" offset where mine broke. Top to bottom screw mount is 5 & 1/4". Thank you

Need left & right hand Overhead Window Awning Operator for a 1987 overhead Kinco window.As you can see from the pictures, the crank attachment comes out at a 90? angle. Spacing between two upper and lower holes 5 3/16". Hope and pray you can identify the part.

Hello, I just purchased Pan Am/Daryl Window Crank Product Code: 39-017 for 5 windows. 3 windows will open fine but 2 seem like they are locked from the opposite side of the crank. I don't see a lock and I don't want to force the window. There is no movement to open on one side, but the crank side ... (cont.)