Viewing all customer Discussions for:

39-017 Pan Am/Daryl Window Crank

I have a 1976 vintage FL home with single pane PanAm awning windows. The problem is several windows will not stay up when cranked fully closed. The proper closing panes snug up & under the panes when the operator is given the final 1/4 turn. I have three that sag down on one side when fully closed ... (cont.)

Hi, the screw which connects the operator arm to the window arm ??? has broken off and I cannot unscrew the head it is rusted on.The remainder of screw is in arm. No part numbers I see a 91 on pivot head Please, I need new part and connecting screw and strength to take off rusty head ... (cont.)

I can I know that I'm buying the proper size to work with my Windows. 39-017 seem like the ones I have. However my house was built in 1971? Mine does not have any double holes side by side. One at top, one at bottom and one off to the side

The pivot bar bearings on 3-season room windows have shattered over time. Can you suggest a replacement?

I cannot find any markings on the window or parts. The windows are probably 55 to 60 years old. It is the threads on the piece that attaches the handle to the opener that have worn off. I hope you can help me.

Hi, hope the pictures help identifying the window operator I need.Thx,Luis

Looking for this crank not sure which one to get

Greetings! My name is Tina Trousdell. My house was built in 1989 and the whole house has Pam AM windows with 11500-11 Pam AM cranks. The right window crank broke several years ago on one of the larger ones. (photo attached of the left side of the same window). The number on the crank is 1150-11. In ... (cont.)

is the arm offset in this crank?

I need to replace please send info. For the part! Thanku pan -am window crank I sent pictures yesterday also! Thanku ina hurry wanna fix it's hot need a.c without letting the cool air out!

Hello I am attempting to identify awning window crank handles and mechanism. I see a label on window frame which states : Pan AM I am assuming this is the brand window. The handle has a number inside which is: 11500-11 Can you identify the replacement crank number? Thank You Joe

Hi, I have an old window crank with three screw holes. Your Pan/Am Daryl Window Crank looks similar except the screw holes do not match. Attached photos show my crank with a single screw on top and two screws, diagonally apart, on the bottom. Can I use your crank or do you have something that matche ... (cont.)

Hello Swisco, I need a suggestion... I have this type of lock in a window at home PAN AM/DARYL WINDOW CRANK. The problem is that the handle came off and we try to put it again is like the window is not closing. I don't know what is the problem... or if I need to replace all the lock. Thank you in ad ... (cont.)

RH window measurements: 2 5/8" link, 5/16ths threaded bolt hole; link is longer than "gear" approx. 1/4" 1 5/16" between lower screw hole centers Distance between upper screw holes 3/8" 5 1/4" from top holes to bottom holes

Markings inside read 3RH 18-0821

Awning window parts The swingarm has a measurement of 2&5/16". All other measurements are the same as part number 39-350. I need three left hand and two right hand actuators. I also need three shoulder screws 33-070 torque bar bearings 36-018H. Thank you William

My part has several #'s inside casting= PAT. NO. D-198,202 U.S., RO.1963 CAN. 11500-4 NO OTHER MARKINGS I COULD FIND? Checked all measurements. You have a great website. upper mounting holes are 7/16 " apart, lower holes are 1 5/16" (close to the 1 3/8" on #39-016). Think I could open holes slight ... (cont.)

I have 2 different window cranks to replace. The one with the slanted top is the one that I have not seen any replacements for. The squared one without the handle in the picture seems to be one that you have. Are they all pretty universal?I don't see any markings or stamps on either one.Thank you ... (cont.)

Need replacements for old window cranks. House is old and nothing is standard. Can't identify manufacturer, although Swisco seems to be very close, if not it exactly. Crank base has the following part no engraved inside: PT NO 10-9231-LH-4.

I have attached several Photos of a window crank from house with four tier louvre window build in 19608 The screw hole is tiny probably close to 3/8 Others we tried had much bigger screw/bushing hole Could you help us identifying maybe