Viewing all customer Discussions for:

39-020 Wood Window Crank, 9"

Hello, Unfortunately, there are no stamps or markings anywhere to be found. This window is no less than 18 years old. As you can see from the photos, the operator is mounted onto the side of the window casing as opposed to the sill. Any chance you may have something along these lines? Thank you ... (cont.)

I have a casement window at my cabin in Pennsylvania. These matching windows close up against each other, but there's no latch besides the operators, which don't work. Please ID hardware to properly secure the Windows. I'm going to try the 39-020 (021) operator, but what about a latch? Do I n ... (cont.)

Hello , I have a Frank Lloyd Wright home built in 1953 , I have over 60 windows in the home and only one window that the gears broke on one side its a right side window Biuilt by Andersen Windows I believe If I could order any of your products that would help me I would be greatly appre ... (cont.)

Thanks for sending the window cranks 39-020 & 39-021. You're the last place we're able to find them, to keep our old windows working. We

Please I need center measurements on the back two screws of model #39-020 window crank. Thank you

Need a left and right replacement for this window, I also need the slide that attaches to the window

I'm thinking your 39-274 might be correct to replace my 5/16 spline Semco window crank handle. My handle shows the number 40095 on the underside and Semco on the top side. There are 11 or 12 ridges in the spline hole. Can you help? Do not have a clue as to who the window manufacturer is nor where to ... (cont.)

We need to replace a very old window crank.

I have a cottage that was built in the 60

I have four old casement windows (see attached photos) that have no operators/cranks. When they're open, the wind blows them back and forth often slamming them with alarming force. I would like to preserve these windows and be able to open them with ease and not worry that they will slam. Is it p ... (cont.)

does the window crank 39-020 suitable for a casement window with scissor hinges and no screen? does the operator track 39-520 mounts on the face of the window? where can we buy your products in the Vancouver, BC area? thank you

Hi, I have old manually operated wooden windows. I would like to add a complete set of new, casement hardware. Do you sell a complete kit, or do I have to buy all the necessary pieces separately? Do you recommend a single arm, or dual arm? When I attach any such system to my window, d ... (cont.)

Hello...I would like to find out if it is possible to add a crank-out mechanism to metal frame casement windows that do not presently have them. At present, you unlock the window and just push it out to open. I want to make them more secure and burglar proof with a cranking mechanism. Thank yo ... (cont.)

Do you have crank similar to 39-020 with a 6" arm?

Attached are a couple of photos of one of our vintage casement window operators. We are going to need to replace these throughout the house as most of the operating shafts are worn down. What model could we replace these with?

Attached are a picture of the window crack operator I'm trying to replace. Can you please let me know if you have anything like it or close to it. Best, Eddy

I was wondering if you could help me with an order that I would like to place. I attached a picture but not sure which operator track I need or what info I need to get right part.

Would you carry this window crank and the bars from window to inside. The piece that is on my window sill is stripped and when I put in the crank, it will not crank out. I could use the cranks also.

I have to reproduce a 1 3/4" thick door that has an operating casement window in top section of the door.I am trying to find an operator for the casement window and I believe you may be able to help me. I have pictures of the old door and drawings of the replacement door I want to make. I have alrea ... (cont.)

Hi. Rt hand window crank just won't start opening the Window. Give it a push - and away it goes. See pics. Some teeth are stripped on the arm. Is there a replacement arm? Thx. RH