Viewing all customer Discussions for:

39-020 Wood Window Crank, 9"

If the measurements of your Getty operator match up to the measurements found in the 39-020 operator product picture, it should work for you. In the event that it does not work, we do accept returns. Visit SWISCO's return policy to see our most current return policy. *Note: This may change in the ... (cont.)

I have a home built in the late 1930s with Hope's window operators on steel casement windows. Several are not working and disassembly indicates the arm gear is worn down to to lack of lubrication and window sticking. Is it possible to replace the arms? Is it possible to buy replacement operators? I ... (cont.)

I ordered replacement cranks for Andersen windows (part #39-020). After they were installed the gears on several of the cranks stripped on the first use. If the window is pushed open a few inches the gears reengage, but the cranks will not fully close the windows.

Will 39-020 work for a replacement on a weathershield casement window circa 1973?

I need replacement operators. The arms are 9

This casement window operator is from mid 1980's Measures 9 in arm from pivot to end. The size is the same as wood window crank as 39-020 except The crank handle is on the left side of a right hand operator. Any suggestions? Thanks Stan

Hi Susan, When we spoke the other day, you suggested that I send you a picture of the wood casement crank mechanism (rather than sending it on to you) that I am trying to replace. If I can't get an entire new one (or several), I could use some handles. Here are some specs: 1) The leng ... (cont.)

Hello SWISCO, We’re looking for a Getty crank arm replacement for a 1960s “Jackson B. Hallett” house. I hope the enclosed pictures will help to find a replacement. Best regards Birgit

Hi, Do the handles come off of these mechanisms to allow for a screen to fit over the window? I have an old cabin (1948) with crank windows that need new mechanisms but the screens which are hinged and built into the window fit flush over the windows from the inside. I think I would need to be a ... (cont.)

Hi There, Looking for replacement operators for what I think may be Hope's steel casement windows circa 1939(ish). Pictures are below - stamped inside the operator cover are the words "Parker" and "Erie." Eire is stamped directly below Parker. A google search on those words and windows yielded ... (cont.)

I have a 24" Octagonal vinyl window where the plastic washer piece attached to the operator arm has broken off (the washer is the piece that rides in the metal channel which is attached to right side of the window). Can't seem to find a replacement washer locally. I managed to glue/fix the plast ... (cont.)

Product 39-020 seems like the proper replacement part but I am concerned about the button on the end of the 9in arm. It has to fit into a track which I measured as 5/8 inch wide. So the button has to be 1/2 inch or just slightly larger. I hope the photos I uploaded will be displayed for you so yo ... (cont.)

I have 2 old arched casement wood windows that are an odd size and no manufacturer will copy. I think I could use an awning scissor-type mechanism and crank to pull them in tight without having to open the screen to pull them in manually from the middle instead of from the bottom. Do you think this ... (cont.)

I am trying to find some replacement window crank handles for our church's stained glass windows. I found an imprint on one of the arm's that says Getty, Phil. PA. Our handle measures 3" in length and 1 3/4 from spline to handle. The base measures 4" long x 1 1/2" side with 5 screw holes. Can you ... (cont.)

39-020 & 39-021 Please let me know which is Right and which is Left. Need to order 2 lefts and 1 right and don't want to mix them up. Thanks for your quick reply.

I am trying to locate window operators (one LH, one RH). I have included some pics. They are 9 inch. The HO has paneled the walls in the room and "picture framed" the windows, so that now the operators are semi-hidden. They have 4 mount screws into stool/sill. Any help is appreciated. ... (cont.)

I have a window crank that look just like your product 39-020 except the arm is only 6" instead of 9" Can you help me out? It's for an octagonal window hinged at the top. Thanks

My window crank is broken and I need a new crank mechanism. I looked at your cranks and the one that appears to be correct for the window that I have (photos enclosed) is model number 39-020. Am I ordering the correct part number along with the 39-520, 39-205, and 39-107 parts. Please respond s ... (cont.)