Viewing all customer Discussions for:

39-021 Wood Window Crank, 9"

I am having an impossible time finding replacements for these I hope you can help or direct me to others that might know where to get or have them.. thank you

we need to replace two broken window cranks. Please find attached pictures of window cranks in need of replacement. The website product 39-020 appears to be the correct style, but there may not be enough knuckle clearance at the bottom of the rotation. Please let me know if after seeing the pictu ... (cont.)

I notice that for some casement operators you have both 6"and 9" arms. It is not clear to what that measurement pertains. Is it the long straight section of the arm or does it also include the bend and gear mechanism? I have an old Getty device that measures 8" to the straight section of the arm. Wo ... (cont.)

Per the attached photos, I have a Geo Henne straight arm window crank that has gotten stripped. It is 9" from the center of the gear hole to the end of the arm. It was probably installed in the 50's or early 60s. I am looking for a replacement. I need both a right handed and left handed one. Can you ... (cont.)

We have original wooden casement windows in a 1910 house. One of the left window openers has become internally stripped and no longer functions. If it would be possible to come close to matching it, that would be great.The arm length is around 9" and I do not think they are original with the house. ... (cont.)

Hi, I do not see any brand or part number written on these. However, it seems like crank 39-021 would be a good replacement for the same window's crank. Thank you!

do you have these? no identification markings

here's another one for you - an old plantation house here on Maui. I'm looking for a replacement for this style of operator. I need a LH and RH one. Thanks

2 photos attached. Can't find anything similar. No identifying info on the pieces. Really seem to need only the gear but will gladly buy a whole handle assembly if it has a gear the size I need. Any guidance is appreciated.Thank you. Jill

I am trying to locate a replacement window opener, but am having a hard time locating one. I have forwarded a picture. Dimensions are 4" x 1.5" x 5/8". The arm is 9" from its pivot point in the mechanism. The rest is mounted into a slot cut out of the window frame.

Can you identify the part number for this window crank/opening device.

I have 3 windows that could benefit from new window operators. House was originally built in 1949. I think that one of the sets has been replaced, but the others are likely originals. Looking at your website, it looks like Product Code: 39-020 could replace this, but I thought I would check with ... (cont.)

The roller piece on my operator is 1/2" diameter. Does this match the diameter of the roller on the 39-021? If it does not, I will need to also order the matching slice piece.

Hello:We have a double casement window operated by a couple of handsome brass cranks. Unfortunately the shoe that travels down the track on the left window has lost its shoe, without which the crank doesn't work. I don't have much hope in finding a replacement shoe. Maybe if I search hard i may find ... (cont.)

Looking for a window casement replacement as seen in the attached photos... This base of this part is 4 inches at its longest... and 3 and a quarter inches at its narrowest (away from the window). It has a width of 1.5 inches.

I bought the Swisco 39-021 for my casement window. But the disc at the end of the arm won't fit into the track on my window. Do you have one that will fit my window, and my track?

I have a casement window at my cabin in Pennsylvania. These matching windows close up against each other, but there's no latch besides the operators, which don't work. Please ID hardware to properly secure the Windows. I'm going to try the 39-020 (021) operator, but what about a latch? Do I n ... (cont.)

Thanks for sending the window cranks 39-020 & 39-021. You're the last place we're able to find them, to keep our old windows working. We

Can you replace this old operator?

I've been in maintenance for many years & always had a verry hard time to locate the products you carry. I placed an order 2 days ago & recieved it today. You are quick. It's great that the customers will not have to wait for months. You are now my first place to locate a part that I'll need to lo ... (cont.)