Discussions for 39-031 : SWISCO.com

Methodology for determining left from right?

Good morning! Check out our 39-031 & 39-032 Truth EntryGard operators. These appear to match your originals quite closely, but you can review our specs to verify.

Do you sell the 39-031 with a step up offset?

I need a left 39-031 with a step up instead of a step down. Do you have these? Also need the equivalent in za right hand version.

Should this operator use the 39-107 or 39-107FK?

I have four entry guard dual arm operators, (39-032) The spline on the operators have all stripped. I will replace them. The current cover matches 39-107. Can I use 39-107FK instead? I would like a folding crank.

The corkscrew gear has come out my operator. Do you have it?

I have a situation the same on two of the windows in the house and I can't seem to locate the part/parts that I may need. on the underside on one of the cranks the numbers found are 14 45054 the other is 16 45054. When I was cranking the windows closed, these parts detatched from the window. Im not ... (cont.)

K/K window gear and worm

i am no longer able to close my K/K window with the crank becuase it appears the gear or work is stripped. I need a replacement I can re-install. thank you

Window Crank Worn Gears

Windows are likely mid-90's custom. Unknown window maker. The numbers on the metal arms look like R308 on one and 20810 (smaller numbers) on another small metal arm. Looks like the manufacturer could be Entry Guard Truth. Photos and best crack at measuring attached. Also, I would need a left an ... (cont.)

+2

Need help identifying window hardware

Hello, I need help identifying this window hardware and finding a suitable replacement. I have attached several photos and measurements. Please let me know which part you recommend. Thank you.

+1

Closing handle will not grip

We tried to close the window yesterday and the gear was loose. When I opened the casing, the gear fell out

+5

Window Casement Arm

Hello, I have a client who has a 42x60" single casement window. The nylon roller has since been worn down and is slipping out of the lower casement track. We are looking for a replacement on this arm. 42x60 windowsingle casement9 1/2" arm Any assistance you could provide would be appreciated. Thank ... (cont.)

Window hardware

I need right and left hard work for window awning

Window Closer

The only identifying marks are is the us pat # 4,241,541 Pat 1982 Straight Arm length is 9 inches ,4in Curve arm 3 1/4 Measurements done pivot/wheel holes

Replacement Needed

Can you get me replacement parts for this crank out Crestline window? Thank you

Entrygard hardware

This piece detaches from the casement opperator everytime we try to close the window. Is there a way to get it to stay or do I need a replacement part?

corroded bottom hinges

As seen in photo "1 window corroded hinge ...", we need new 10" bottom hinges on four old Viking windows (we'll be moving the guilty sprinklers, but stainless steel replacements seem like a good idea). We also need an operator for a right-hand window (opposite opening of the one in the photo). The t ... (cont.)

Window Crank Replacements

Hi- I need a right and left crank for the first photo. The other other two I need the exact replacements. Can you help? Thanks

Missing parts

The first photo shows the working-correctly window. The second photo shows the parts I have. The tracks on the bottom of the window are also missing. The long track may be a Truth 39-528 (?). Any help will be appreciated. Thank you.

Milgard parts

Hello, I have quite a few Milgard Classic Casement white vinyl windows from 1997. I was looking to get various parts: bottom roto arm upper roto/hinge arm sash locks roto crank and cover thank you for your help!

pella window crank

help

Window Operator Handles

I am looking to find the correct windown operator hanldes for existing windows. I would like them to be foldable to be more flush with our windows. Brand: Windsor Windows Styl:" Casement Material: Wood Year: 2003

window parts needed

Good morning Here are the parts I need. First two top and bottom view of same part. Last two are of the same part just different views. I will need both right and left hand operating window part numbers. thanks

+1

Viewing all customer Discussions for: 39-031 EntryGard Dual Arm Operator

Viewing all customer Discussions for:
39-031 EntryGard Dual Arm Operator