Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

Hey I have 2 windows that the mechanism is stripped so windows wont roll out I have attached pics to identify the hardware. Need to find out how much they are and how to order this part. I have 2 windows. I am assuming that there are left and rights? is this correct? I will have 2 check but i think ... (cont.)

I don't know what parts we need to order to permit us to open and close these casement windows...the casement windows are old and we don't know the make of the windows or the parts so your assistance is requested...the windows themselves are in good condition I hope the photos I took are sufficient ... (cont.)

I need gears and cranks for 3 left and 3 right swing casement windows. Kolbe/Kolbe from the early 90's

We installed our window in 1985 which are Pozzi wood casement with aluminum cladding on the outside. They have an apparent defect from new in that the geared stem that the crank attaches to was pressed into the crank assembly but the pressure from closing the windows puts extreme upward pressure on ... (cont.)

need to know where to find them

I need to replace the operating mechanism to a truth window. I would like to go bronze in color. I have window locks too. Can you recommend what I need to order for parts. The window crank hasn't stayed in place so I think the whole mechanism inside this one window needs to be replaced. ... (cont.)

Hi, I am pretty sure that the attached part is your part #39-031 and 032, but please confirm. On the back of the 10-3/4" arm has markings of "LH 30470" and on the 4-7/16" section, it's marked "20810" Thank you in advance for your assistance. Gary

We have a Entry Gard number on the long arm is 30472RH on the shorter it is 30842R and the shortest is 20810. The number where the on the crank is 30830. My husband has highlighted the part that we are after. It looks like part of the bit that screws in to turn that opens the window has worn so it ... (cont.)

We have some older K&K windows and the cylinder that opens combines with the wheels to crank open the windows no longer works in most of them. I was wondering if you can just buy that replacement cylinder rather than buying the complete arm insert.

The crack assembly for the right and left window aren't working. Do you know where I can find replacements? Thank you Ken O

The picture of the tilt window lock for left side. The open and close mechanism for a casement window right side.The designation of left and right is from inside of the window. The GLW windows were installed 1991. No stickers on inside of windows. The arm part number is L30841 no number on the plast ... (cont.)

Dual arm regulator assemblies. Left and Right. One each. "TRUTH Entry Guard" on arms. "EAGLE" on crank handle. See pictures

Window is a Norco. Crank broken - can't open or close window. Can you help me identify a replacement part? Thanks! PS I am the homeowner but I am working with a contractor to do the replacement.

Hello, my name is Ben and I need some help tracking down hardware for some casement windows I believe the company that manufactures the windows is called K & K The windows glass sizes are 24-1/4" wide x 54-1/4" tall 24-1/4" wide x 48-1/4" tall I need a right and a left hand for both sizes ... (cont.)

I need to replace my delmar window parts but do not know the size nor where to purchase them. Can I get help with this please?

I have a left hand casement window (see photo?)with damaged Bilt Best operators. The crank handles are no longer attached to the operators. From the attached photos can you help me identify Thanks

The problem here is that the window crank will not engage with the armature cogs--can you find me a whole new unit?

I have Pozzi casement windows in my house. One of the opener broke (see attached photo). I think I will need to replace the arm operator, cover and crank handle. The width of the window is about 25 inches. I think these windows were installed in 1987 or 1988. Since I am not the original owner, I do ... (cont.)

Tom said in his May 5, 2016 : I'm afraid you will need a new operator Could you please identify the exact pieces I need; And where could I find them in Montreal; Or where could I ask for delivery by internet. Georges

Hi, can you help us identify these parts? We are looking for 2 right hand operators, 1 cover plate and 1 handle. Thanks for your help!