Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

I am looking for a part or way to fix or replace the crank to this Truth window. the window opens, but when I close it, the assembly screws itself out of the window.

I need to order these replacement parts ASAP! Thank you ? handle & cover in bronze!! EntryGuard Truth Right side casement crank

Neeed replacement for both sides. Left and right.

Looking for replacement part number for the casement window opener for which i have attached a picture of the hardware. Window is hinged on right hand side (From Inside Home). Please advise if you need any additional information.

Please see attached photos of broken cranks/operators for older Pozzi casement windows. I am in need of replacing on 5 windows, but would likely order additional parts for future. Please let me know if you have these parts. I will be sending another post with additional pictures. Sorry, I am not ... (cont.)

Double pane windows about 20 to 25 years old with a crank mechanism as you can see. The house has many windows. Windows that have been used frequently or been open during rain have mechanisms that no longer function well. Usually this manifests as a stuck or stripped crank. Sometimes the arms are pr ... (cont.)

I have a "crank" operating window that I cannot close after opening. I am looking for the proper fix, possible a replacement crank. Thanks Tim

Hello. My name is Gary Boerema. I'm looking for this window crank. It is for my bathroom window. I need the crank, handle and the white attachment if possible. Any help in this matter would be greatly appreciated. You can respond to email above. Thank you. Gary

I need replacement operators and hinges for two casement windows, one right and one left. Do you carry what I need? Which ones?

On the back side of the casement arm, it is stamped" 30-473 RH.the longer arm is 9.5" and the shorter connecting arm is 4.5"I need to order the complete window casement crank setup , for both the bottom and top parts. I do not need any locking hardware.I estimate this was purchased and installed a ... (cont.)

Here is some more information that I can share: the push arm, has a number of 40754 stamped on it. The link arm number appears to be 30810, but is XXX'd out, replaced with a new number of 21135. Pull arm has 31538a stamped on it. Hope this is helpful.

I have a broken casement window operator. It says Entry Guard Truth. The number on the arm is 20544. The number on the cylinder barrel is 30710. The short arm is 3 15/16" center to center of the holes. The outer mounting screw holes are 4 7/16". Looking to replace this.

Hello, I'm looking for a replacement for a broken window crank- please see attached photos. thanks!

I have a EntryGard 20755 arm operator and a Caradco hardware cover. Can you please provide the replacement part numbers. Thanks

The crank handle says us pat 4083264 Can pat 1979 And then 45012 on the right corner

I need two replacement units for Semco casement windows. the gear unit is stamped with the number 45179 and the operator arm is stamped with the designation "L 31538". Thank you. Richard

base is stamped 40254 gearbox is stamped 30471 dual arm need 2 right, 2 left with handles

Hello, I need to identify the part in the second/middle picture (Also circled in the first picture). It's the metal piece that attaches directly to the bottom of the sash. The rivoted swivel piece attached to it has a part # of 31229. It all seems to be Truth hardware. Are the right and left handed ... (cont.)

This is a dual arm window operator. The longest arm is approximately 9.5 inches long. It is likely made by Truth, though that's not certain.

There are some numbers in the part -03- I4- 07 I need a right and left one