Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

This 25 year old window has swollen and become difficult to close. The operator shaft gears stripped when too much pressure was used. Hopefully from the pictures you can tell me which casement operator I need. It appears to be exactly the same one, except opposite direction, in your YouTube video at ... (cont.)

I need 2 of these, what is turn around time to ship?

Look to replace two window cranks #1 30472 RH 11" from center screw hole to end of arm. Arm 20755 is 3 3/4" #2 30470 LH 11" from center screw hole to end of arm. Arm 20755 is 3 3/4" Please note for some reason it will not let me upload photos. E-mail me and I can send.

the handle says Thermal Gard. the inside gears say Truth. If you have these parts can you help me order them?

Looking for the part number that matches this 20810

We are looking for (4) Left hand and (4) right hand handles and (8) covers for the type of window above. Please let me know if you are able to locate the type of window this is. Thanks!

Crank does not operate. Shaft comes off with handle. Will not operate window. Need new mechanism.

Marvin Casement Window Dual Arm Roto Gear operator. The original operator stopped working early on (1994?) and Marvin sent me replacements, twice. Both replacements were Right Handed units. Mine was a Left handed unit!! So I have two (useless to me) lefts but need a right. The number on the two pa ... (cont.)

'Entry Guard Truth" crank assembly Base plate # 40471 Long arm # 30470 LH (9" pin-pin) Short Arm # 20755 (3.25" pin-pin) Connector Arm # L30841 (3.25" pin-pin) Gear Teeth are Worn down Need to replace crank assembly. Appears to be a Left Hand Assembly. Handle is OK Window hardware is OK ... (cont.)

you can read this in the old part : Entry Gard. TRUTH. R 29810

Thanks for posting. See either our 39-031 & 39-032, or our 39-155 & 39-156. Compare the dimensions of both sets of operators with your old hardware to see if either is a close match.

Entry Guard window crank L3084 maybe L30841. Cranks to the left and window opens to the right.

Long arm is stamped 30472RH, Short arm stamped R30842, Base stamped 40372. Entry Gard Truth

Hi, I need to replace the operator for one of my Caradco windows. The corkscrew bore has broken off. Unfortunately, I cannot open this window to take a picture of the arm. 1) 1st pic(0166): is of the arm on the 2nd window which works 2) 2nd pic (0165): is of the corscrew bore which is broken 3) 3r ... (cont.)

I ordered your opposite operators 39-155 and 39-156. But the order arrived and the -156 was your similar-but-different 39-032. I did install the -032 you folks sent to me. And because of the longer link arm I put the notch in the side trying to get it to fit. As for needing an inch or so, that is ... (cont.)

I am looking to replace at least two window cranks. Attached are the pictures of the broken window cranks. If you sell a replacement part for the broken window cranks pictured, let me know the cost per window crank. Thanks you.

I need to replace almost all the casement window handles for my Jeld Wen windows. They were installed around 1991 and are wood. I need about 12 handles. The only number I saw on these handles was 20755. Thank you, Nijma

I need to replace parts for my Eagle brand windows that were installed in 1991. The first picture (0154 JPG) is what it looks like on the inside. The next 2 pictures (#0152 JPG and #0153) are from one larger window. I have taken The next three (0149 through 0151 JPG) are from one smaller window. Th ... (cont.)

Hi there, I have Eagle Casement windows from about 2007 that have handles that stick out into the room. I'd like to switch out the current handles, operators, and operator covers to sets with handles that fold into the operator covers. My current handle set is centered on the operator, but given th ... (cont.)

Hi. We installed 4 casement windows in our house LA 20 years and the crank hardware is going to pieces and needs to be replaced. Your video for replacing them is as clear as can be but beyond my abilities as an unskilled homeowner. I'll need to find somebody to do the work, but hopefully you can hel ... (cont.)