Viewing all customer Discussions for:

39-044 Getty Operator, 9" arm

Hi- This casement operator has a 9" arm and is metal. Seems too sturdy to be aluminum. We need the right hand replaced but depending on price may also do the left, to be safe, as it is also original. Not sure which to order due to the mount placement and limited space between the mount and the ... (cont.)

Hey there. Thanks for helping. My Dad sent me the attached pic for a Getty bronze crank. You have one that looks the same. other than it's brown or aluminum. He is out of town, and so it's hard for me to get what we need, i.e. multiple pics from multiple angles. He has tried to explain t ... (cont.)

Hello, I am looking to replace some old Getty operators with a 9 inch arm. it looks like they might be part #39-044 and 39-045. please see attached photo's and let me know what you think before I order them. thanks for your help. the part number etched on the arm is Getty P411 6,P6. Brien ... (cont.)

Dear Swisco, We have a school with casement windows. I'm looking for a stronger operator. It looks like the 39-001/002 and the 39-044/045 would both fit my windows. Which one is stronger inside? I'm looking for something that can stand up to a 12-year old.

I know its hard to see from the picture's. When you pick up the operator it is heavy and solid not like the thin die cast. The one in the picture has a 9" arm that will work but 11"arm will be better. We will need 50 left and 50 right and will need one first for approval. Please no delays ... (cont.)

I need to order 2 window winders to replace ones seem to be original to home build in 1935. It says Getty on the arm of the winder. The arm is about 9 inches in length.

Hello. I recently purchased several 9

The interior gear seems to be stripped. Fentron is stamped on the handle. That's all the info I have. Would like to purchase a replacement, possibly more as I work through the house. Windows are circa 1962

Hello, I have several old casement windows that have the gears stripped on the arms. The operators and the worm gears are all fine, but the arm gears are stripped. By my measurements, your 39-001 and 39-002 would make full replacements possible, but I was wondering if it is possible to just get ... (cont.)

I need your help! For months and months I've been looking to fix a broken casement operator. I'm attaching three photos with a measuring tape. Can you give me options of what you have that will work? The arm length isn't a standard size! Thank you so much, please let me know if you need ... (cont.)

The arm is 9" from center of wheel rivet to center of pin (as shown on your site) the distance from the mounting screw hole center to center is 4 3/4" and 3 7/8". I need 8 left and 8 right in bronze. Also, I need one track for the bottom of the window that the roller fits in. The windows are metal f ... (cont.)

I don't know who the manufacturer is. The hole pattern matches the 39044 configuration, but the arm is 11" long. The number "40067" is stamped on the arm. The operator has threaded holes and is mounted from the backside (window frame has through holes). The channel guide resembles 39504 and ... (cont.)

If the measurements of your Getty operator match up to the measurements found in the 39-020 operator product picture, it should work for you. In the event that it does not work, we do accept returns. Visit SWISCO's return policy to see our most current return policy. *Note: This may change in the ... (cont.)

Hello, I'm the administrator at a church and the sexton has brought this casement operator to me. We need two RIGHT HAND and one LEFT HAND. Attached are photos of the left hand operator; it has no identifying marks on it. However, the sexton found the word 'Ualco' on an operator in another room s ... (cont.)

Do the 39-001 & 39-002 crank assemblies come in bronze?

Ordered your 39-002 product then cancelled. My wife does not want silver. So we are looking at your 39-044 Getty product. My question now is: none of your products state they are made in the USA. I was referred to your company because they said your products were USA. Are your products still made in ... (cont.)

We have a number of Getty (Philadelphia PA) operators at our summer cottage, the track of which fastens to the vertical window frame surface, not under the window, with three screws. The track is 12" long. Our tracks are OK. But we need to replace the operators because the teeth are pretty much gone ... (cont.)

Hi there. I am trying to find the right replacement for my window operator. A picture is attached. The arm has "Getty" stamped into it, and the screw hole measurements are indeed 4-3/4" and 3-7/8", but the body is curved in a slightly different way. And on my old part, the helical teeth are very vi ... (cont.)

Have read some of your other replies and greatly appreciate your knowledge and consideration of the questioner. This 39-045 operator is the closest thing I see listed to the stripped out operator I removed from what I believe to be a "RADCO" aluminum casement window new in 1978. Screw hole alignmen ... (cont.)