Viewing all customer Discussions for:

39-044 Getty Operator, 9" arm

I just bought an older house and all windows have this kind of opener. None of them work. Do you have this or a replacement that could fit? Thank you

Hi, The cabin was built in 1956, we are looking for 2 left and 2 right window handles that will fit the same specs. Preferrably in aluminum or white, but we can paint, if no other colors are available. Thank you for your help! Hans

I am looking for brass window cranks for a home built in 1930 with a large number of leaded glass windows which I believe were by Getty of Philadelphia. Attached are pictures. The base of the crank is around 6/16 or 7/17 wide. Some of the groves are worn a bit thin so it will vary. ... (cont.)

Ghetty Chila, pa

Hello, I'm restoring a 1938 garage apartment. These window cranks are from the original steel casements. The only distinguishing feature that I can identify is the 2 screw holes versus the traditional 4 that I've seen in other homes. The crank handle itself is also a unique shape, at least to my un ... (cont.)

Hello, I?m looking for Soule crank mechanism for my aluminum windows

Trying to restore casement windows in a 1950?s duplex. Cranks could have been replaced at some point. Crank says Taiwan on underside. I am just looking for something to replace and make the window function so I can keep windows. It doesn?t have to be an exact match.

It looks like I have two different style cranks. Both have 9" arms. What is the correct replacement part?

Hi Swisco: As shown in the photos attached, I have an old aluminum Getty-brand window crank that needs replacing, as the gear is stripped at the end of the movement, making it impossible to close the window without pushing on it from the outside. (the stripped gear is not visible in the photos). ... (cont.)

I'm going to order 25 operators and want to get it right? How difficult is it to install a new channel guide?

I'm looking for approximately 23 left and 20 right hand operators to replace existing, It appears that products 39-044 and 39-045 would work, can you please confirm?

I work for a remodeling firm and am looking to replace a piece to this Getty Window opener, I have the arm piece but need the bottom piece that is attached to the window sill. Any advice on where I could get this would be helpful

I looking for replacements. The armature is 11". Thank you, David

I am trying to find replacement operators to replace several operators that no longer work. The attached pictures are of an original operator. Which side are the hinges on for each hand? I will need both right and left hand operators.The property was built about 1950. The windows are inset in the ... (cont.)

Replacement parts

Please let me know if we can order this from you - We would be open to ordering whatever you can get. Thanks!

Hi, these cranks are in a New Orleans church building; construction probably dating to the 20's?. They are brass and a bit different than similarly sized current ones, both by having a rectangular brass slider held in place on the arm by a short screw as well as a centrally located crank. Exact re ... (cont.)

I need a replacement 'window operator', and possibly the 'channel guide' that the arm connects to.

We have a small jalousie bathroom window (approx 24x36) in which the window crank no longer works. The handle itself looks OK, so likely the gear is stripped inside the mechanism. The operator is on the bottom left side of the window. I do not see any markings or identifiers on the one I need to ... (cont.)

need replacement for this style of operator. screws are countersunk in the steel frame and thread into the two holes on the mechanism.