Viewing all customer Discussions for:

Door & Window

We think the windows are Simonton (installed in our house remodel 20 years ago). Could not find any names, numbers or markings on the existing hardware. Hopefully the photo helps.

I need new 21 inch channel balances that look like this one for a 34 lb window

Looking for the part and stainless steel

Hello, The top of the balance was not fastened to anything.There is a screw that is next to the balance to keep it in the channel but the screw only serves as a stop. The pivot shoe the balance attaches to is the 15-105. I will remeasure the 25" balance once more to make sure it isn't a 24, the ma ... (cont.)

I need a couple of these slides that attach to the tilt window and spiral balance. I don't know if the items in the 2 photos are 1 part or 2. Can you identify what I need? If so, what is the price and how do I order? These are builder grade windows. I am not sure of the brand. Please let me know if ... (cont.)

Im looking to replace my sliding door mortice lock. It has two locks on it. I got it installed from Castle Windows. I will also need to other plate that goes on the other side of the door jam

My windows need those parts to make them go up and down. Live near beach. Need replacement parts.

looking for this part or similar with overhang on the corners

Looking to replace this crank as I believe it stripped. The hole that connects to the window is 3/8" in diameter. The arm with the hole that connects to the window is 3" long. The two screw holes on the bottom are 1 3/8" apart center to center. The top screw hole to the bottom is about 5 3/16" cent ... (cont.)

I need 2 of this crank operators. Let me know if you need more pictures or measurements

I need one window balance which has broken cord.

Hello, I am looking for a new white pushout handle for a window in my condo unit. I have attached pictures for reference and hope they are helpful. After contacting the company these were originally sourced from, Innotech, I was advised that they no longer carry these in stock. Thank you, JP ... (cont.)

Can you match up this aluminum patio door wheels for us please?

These windows were purchased in 1986. We need several balances.

My roller is on a Pella sliding glass door: 11/16" wide 1" tall 1-1/4" steel wheels Tandem roller Thanks Tom

Hi Here's the photo. Length is 12 inches. Distance between screw holes is 10 1/4 inches. Thanks for your kind assistance! Val

Hello, I am in need of the part on the double hung window on the bottom of the window that attaches to the balance springs.

Hello, I am looking for a replacement door handle and latch for a Herbst LaZar 1983 storm door.

I would like to order 2 bars for the sides of a window. The number is 86 26-4 JA5 CMC 2. Below are photos. The bars measure 28" end to end. By the way, they would be shipped to Arizona. Thank you!

I am looking for replacement for broken window safety stops.