Viewing all customer Discussions for:

Door & Window

Do you have this mirror wardrobe door top guide? Please let me know if you do with the part number so I can order it from you. Thank you

need the crank handle for this type of window receiver bolt. (white crank handle for set screw hex bolt) looks like roughly 3/8"? not 11/32

Window is 20"tall x 26" wide. From watching your video, it looks like parts I need may be the 160 spring, 15150 support, and the 15111pivot

Can we purchase the handle assembly for the Awning Window Lever ? Our home was built 35 or so years ago and before we take the steps and replace all our windows we would like to repair what we have. Thank you.

Need to replace this type of hardware for several windows. Not sure of the type required or if I need to replace the track along with the lock balance shoe. Also not sure if you have instructions on removing the old hardware from the channel to place in the new hardware.

Need to replace pivot bar. Old one is 2.5in, window manufacturer unknown

Window identification H-R25-47x71 series VY775Length of channel balance measurement 27"

Hello, Need a replacement. Looks like the Legacy Keyed Handle Set, 3-15/16" (1-1/8" to 2-1/2")Product Code: 82-086 But my handle is 9 3/4" in over all height. The inner holes are 3 15/16" Is this a suitable replacement or do you have one that is a little longer ?Thanks for the help !1Jeff ... (cont.)

Need to repair my window hardware. I have 1985 Marvin wood casement windows. We thought we found the correct hardware but I wasn't exactly the same as the old. The way the metal hinge was attached was a little different. Hopefully you can help identify and let me know if these are available. Here ar ... (cont.)

I'm needing some parts for my sliding glass door. Pictures attached. Thanks , Matt

This crank handle is hinged to lift out of its holder to crank out the window. There are no markings on the handle or window. The stationary pert fits over a piece on the holder to open and close the window.

Hi there, My home was built in 2000, and I have single hung windows throughout the house. The coil balance assemblies are in varying states of failure, and I'm hoping to be able to replace them. I came across your website and am hoping you can help. I am not sure who the manufacturer is for the win ... (cont.)

Hello, My window balance shoe coil is broken.Which coil should I buy to replace?BTW, window weight is 9.5 lb.

Length of metal channel is 31 11/16". Stamp is 31 4 B.S.I. VP I need two.

Hi.I am looking for the part in the attached pictures, a right and a left latch.Your part numbers 26-243 and 26-244 have all the right measurements. My only concern is that the arrow shaped part on those parts butt right up to the edge of the housing while on mine, there is some space between the ar ... (cont.)

I broke the handle off my window latch. I found youtube video that said start by opening window. That's the problem! I tried to remove the cover by prying it off with a flat head screw driver but I'm not sure that is the thing to do. It didn't pop off and I stopped.

Need 2 balancers

Need help to identify parts. Length of the metal is 30".Thank you Vlad.

I need identification of a window balance for this window. The numbers on the side of the balancer say 2740 3. S. I and the letters RJ.

I am looking for this window tilt latch.