Viewing all customer Discussions for:

Door & Window

Looking to purchase both right and left latches

Greetings, I need the stud bracket to this roto operator. In the photos you will see the swing arm that broke off from the sash(popped rivet). I think it attaches to the "L" bracket on the edge of the sash. The operator itself is still working but can you I. D. the entire assembly? The "L" bracket ... (cont.)

Looking to identify the correct replacement rollers for my patio door Only identification mark is a v on the roller frame

The size is 29 inches without the plastic brackets the only marking are C 2830

I'm looking to get an extension rod for this crank window. I probably need a 4" extension rod to clear the wood frame encasing the window. The covering says "JELD-WEN" on the outside and "Truth Hardware" on the inside.Do you sell these extensions? If not, can you help me find someone who does? Thank ... (cont.)

I have Silverline 1200 series double hung windows where the pivot pin in the lower sash has rusted away. I'm seeking replacement pivot pins. The picture shows a pivot pin from another window of the same dimensions to show what it looks like. I plan to order 10 pins as I probably will need to repl ... (cont.)

I can't find these rollers, from early 80s all aluminum door. There is not a vertical raise or lower adjustment on the roller. The screw just pulls the roller in the bottom channel back and forth. Also, it looks like you have to take the vertical rails off to slide out the roller from the bottom ... (cont.)

Length 4 7/8" says custom built for P.H.

From the outside the widow hinge is on the left side. From the inside the hinge is on the right side.

Howdy - im at a loss of what parts to order to replace the weatherstripping on my 1 PGT sliding door and 2 windows. Thank you for your help

Pivot and window seal (fuzzy).

please help identify the right replacement1997 vinyl window frame

I need 4 of these replacement window balances, if you need more pictures or any other information let me know.

Is 32 in long by 1/2 in i want to buy a pair

Need this lock fixed on a house I am selling. Piece in 1st picture is broken. Tried to have a handyman repair it. He used a platic bond glue and it's just not working right. Any recommendations on where to find the piece that is broken or willing to buy a new handle that will work! Need repaire ... (cont.)

Kitchen window handle right and left I would like to know which part I should purchase to replace

I'm looking for the replacement for the left-side shoe for a 3/8" spiral window balance. The pics I included show the right-side balance in place and fully functional. The left-side balance appears to have a bit of plastic broken off near the top. I still have the little metal positioner that sit ... (cont.)

No part numbers or part markings approx 1978 year

See the photo, I have problem the sash doesn't seal the window, they are uneven I don't know if the spiral are the problem So.can you help.

I can't risk taking it apart again. The broken part of the upper screw is stuck in the outer handle. We have lived in the house 4 years and our neighbor said the other people that remodeled was about 9 years ago. There are no visible marks, names or serial numbers on the parts. The 2 screws that ... (cont.)