Viewing all customer Discussions for:

Door & Window

Please can you order me Two (2) replacement coil spring balance assemblies and two (2) pivot bars for PRISM window. Photo info attached. Thank you.

Door is very thin, also lock body face plate looks Tappered

Hi I can use your help Need replacement parts for two windows

Not sure of the part number, but it's the part I'm pointing to. The detach clip no longer holds it in place. Not sure I need a new detach clip or new bracket.

I am looking for the replacement weather stripping on Norco Aluminum Clad Windows installed 2004.Thank you,Doug

We have a Kinco window that will not stay up and part needs replaced. Both balances are not attached and no longer working. The window is 47 1/2 x 50. We have not removed the window to get exact length but looks like 24 inches. The width is 1/2 inch. Do you have replacement parts? Lori ... (cont.)

I'm needing about 6 of these 3 lefts 3 rights Beige in color

I'm looking for this handle with lock. Don't have to be a Croft. Need asap .

I need 15 of this style, sliding window latch, or something that will work to replace them. They are made out of pot metal and just fall apart in your hand when you remove or install them,Larry

What is the diameter of the pull ring in the portion of the pull ring that latches over the hardware head for 70-004? My screens are missing a few and the existing pull rings have a diameter that is just shy of 5/16." I purchased some similar looking pull rings from a local hardware store and that ... (cont.)

French doors screens parts needed for our home. The doors have a cross brace and one of the door crossbar screen clip is broken. Also the clear plastic screen clips are worn, needing replaced. The crossbar is 26 3/8 long and 1/2 wide with an inside of width inside channel is 3/8. I may need to repla ... (cont.)

Milgard Length: 25 5/8" Shoe: 1" Stamp: 2540 Quantity: 10

metal broke on the balance - can't figure out what this is on your site

The part number is #1822502

Hi - I hope you can help me. My patio door lock is broken. The metal part no longer lifts up. Not sure which is broken - the handle - or the locking mechanism - or both. Hope these pictures help. If you have any questions, please let me know. Thanks, Eda

Truth left hand operator old casement window. Numbers appear to be 3084L on arm and 30843L on gear. Need replacement operator. Thank you. Bruce

Hello, I need patio door rollers. I ha e attached photos. The length is about 4.5 inches.

My patio and patio sliding door was custom made so there is no company name to look for replacement rollers. I will need to replace them with something similar that will work.

This is from a MI window serial number 16317516.1. The upper sash won't stay open on two windows so would need four parts also the grey tab broke off the window and not sure iff there is a part for that and I'm not sure if any of your parts are compatible hopefully I would be able to use something. ... (cont.)

Hi. I'm looking for replacement for the latch mechanism for a Jeld Wen sliding door handle. Photo attached. If you can point me to correct part please. Amanda