Viewing all customer Discussions for:

Door & Window

Sliding door handle and mortise on patio door. Mechanism will no longer catch and lock the door. Locksmith installed a single mortise even though we said it needed a double mortise. Unit is about 10 inches with screws about 4 inches apart. Unable to find parts at big box stores.

Need to replace handle

The length of the channel is 15 in.

Hi, I would like to know if you carry this operator. It is a dual arm. Arms are 9 in. long. It has a screw in retainer plug with two flats. One side of the retainer plug that holds in the threaded shaft is about .622" while the other is about .685". The threaded shaft looks like the shaft/stem f ... (cont.)

non tilt balances 28" channel length 1/2" channel width Balance fitting 1" hook side 1/2" top side weight of sash For example, if your stamp is "28 3" or "28 C", you'd choose the strength option "2830" to support a window weighing between 16 lbs. and 23 lbs for some standard balance series. 2710R B ... (cont.)

Do you have one of these in stock?

Hi,I need a replacement opener for a Ventarama skylight from 1993.The opener measures 12-1/4" long and 2-5/8" high.Thank you,Don

2 7/8 " aluminum

I have a double hung window and will not stay open. The balance spring cover has 29 9 KW CMC 11 printed on it. The window size is 51 1/2" x 32". Do you sell such a window balance spring? If not, what might be a replacement?

Just wondering dimensions of SWISCO Flip Top Pull Pin Assembly [1080p]. I have a lot to replace. Mine are like photo.

I order the same with u befor twice but I cant find my old order

Do you carry the latch/handle for a Pella casement window? I have about 3 windows with no handles and 2 with handles. Bought this house and trying to fix the about a thousand problems. Thanks!

I am looking to replace the tilt latches for this double hung window. Can you help?

Hello , I'm looking for Slider Door key lock replacement for Sash Controls Inc part # 19 Thank you

Hello I need a 30 balances that's 7/16 wide 34 long Please see attached pictures Thank you

Looking for window replacement what appears to be 5"1/2 swing arm and 9"1/2 ish bracket

Thank you

Trying to identify what this is called

frame is 5/16 thick. There are what look like 95-182 in the upper corners. Do you have these latches? There are also middle pins along the sides that look like the upper corner plastic pins. Do you have those?

Hi! I have a VPI door that needs a new sliding door track that has been discontinued and VPI referred me to you. I see part #80-106 matches my dimensions but I need a 10' length, not 6'. Am I able to double up the part so it reaches the length I need? Thanks!