Viewing all customer Discussions for:

Door & Window

Hi there, my lock no longer works so I'm trying to find a replacement. Can you help identify?

Hello! I have a customer that purchased quantum windows in like 2009 and they no longer have the warranty and have this broken cam lock (almond color) I need to order another one

Looking for replacement part for the window latch

Need assistance on selecting the right stamp option or sash weight range. I have already determined the model type which is 380 and the length of the 380 channel which is 29 inches. The top and shoe of the balance have wings which is the 380 series and the depth of the shoe is 1inch. The size of ... (cont.)

Hello, Can you please help to verify if my existing piece matches with Series 385 Option 2740? The metal clip on the existing channel is snapped off. Please let me know if you need more photos. Thank you.

Please let me know if you have the parts shown in the photos. Also, if you do, an installation guide would be helpful. Need both left and right of the part in the third photo.

I have a screen with only one plunger pin left. Unsure of size

Locks on outside of frame.

Looking for 2 of these from a 1980's sliding glass door.

Need 2 replacement channel balances for a small single hung, non-tilt window. thanks!

Some of our housing covers and cranks were miss placed during construction. We need 6 covers and 6 cranks. I have shared pictures of the fronts and backs of both.

I need to replace hinges on some of my cabinets. I have not been able to find the correct hinge(s). Where can I get this hinge? It has 2 Patent No.s # 5,233,726 6,226,835 Can someone please tell me where to find this part so I can repair my cabinets?! Thank You. I will include a picture of the hinge ... (cont.)

Dimensions 27 in by 1/2 in shoe depths is 1/2 in

1. Metal channel length: 32 5/8 2. Stamp:32 9 B.S.I 0V 3. Need 4 of these balances

Length: 31" 10/16 Stamp 31 3B.S.I.PP need 16 items

Window rollers 1/4" wide, 3/4" long, 1/4" tall, 3/8" wheel size

Hello - looking for replacement part for handle 2260. The thumb turn tab at the interior of the mortise lock that throws the latch has fallen out of the pinch holder.

On the outside of the door at the bottom, there are 2 holes for the 81-018 Tandem Roller height adjustments, I need new caps for those holes to keep the rain and snow out.

Our patio room room is labeled Custom Patio Rooms. I have a bad roller that is shown. The adjuster screw is above the mounting screw. Are you able to match this one? Thank you

I have a casement window with "Truth" hardware. The locking mechanism no longer works because the plastic clips that hold & guide the Tie Bar are broken. The part # of mechanism (not broken) is 31401 and the Tie Bar is 18 7/8" long with two buttons (also not broken). I have enclosed a photo of the b ... (cont.)