Viewing all customer Discussions for:

Door & Window

Needing o e of these lock g mechanisms for my window

Hi, Just wondering what balance spring set I need to order for this Anlin window

Hello, I need a replacement for this broken window latch. Thanks, Greg

I like to know if fits in my window?

20755. Caradco. One of these cranks is completely no longer working in one room. Handle came off and is stripped anyway. I had to grab the silver piece inside with a vice grips to turn it (doesn't turn freely) and have someone outside pushing in lightly on the window, just to get it closed before we ... (cont.)

I am looking for these wheels 1/4 wide strip and wheel. Wheel diameter 1 inch

Can't find any name. The lock is about 2.25" long less handle. About 1 5/16" high and 11/16 wide at the top and 3/8 wide at the bottom. Separate "cams?" in the center.

Balance markings 86A 24-4 HD5 CMC 54Metal length 25"Top and bottom have wingsShoe depth is 1 3/32"Width 9/16"Channel width is 1/2"If both sides are the same would like to buy 2Thank You for your helpElias

Length of balance is 36"

Patio door handle from a Bonneville door with hardware from KC Windows and Doors in Manitoba Canada. Total length is 10"

METAL CHANNEL IS 30 7/8, THE NUMBER STAMPED ON IT IS 3030, UNFORTUNATELY I DO NOT HAVE A PICTURE OF THE CLIP OR ANYTHING IN THE CENTER OF THE BALANCE BECAUSE IT'S MISSING. NOTHING IS IN IT. THE PHOTOS I PROVIDED ARE ALL I HAVE. PLEASE LET ME KNOW IF THERE IS ANYTHING ELSE I CAN DO TO MAKE IT EASIER ... (cont.)

I have Semco windows and the crank operator appears to be the same brand. I am not sure of the gold gear mechanism. The window crank that you spin to open/close the window seems to have unscrewed itself from the unit, which now redners it uselss. Do i need to replace the entire piece, meaning, the o ... (cont.)

I have what I suspect are semco casement windows. I'm trying to replace the crank, window parts and locking mechanisms.

Need 2 replacement window operators with offset bottom screws (see photo). Have seen lots of "side by side" screw holes but none with the offset. Please let me know if they are available.

Door made in china. Curved track. Single plastic roller around 1 inch diameter. Single roller attached to swivel/twist to follow the curved track. PLEASE help!

Need a sliding glass door handle comple for the one pictured.

There are 4 pictures of different spare parts for windows.

Need a replacement for a broken latch (approx. 4" long) for Bryn Mawr II vertical window.

Hello I have five windows on a house I just purchased that have broken coils. Can you please tell me if you have these parts? Thanks

Looking for right and left