Viewing all customer Discussions for:

Door & Window

Aluminum screen clip that hooks to window frame

Can I purchase a folding down crank for this window crank style??

Don't know the manufacturer or where to purchase this please help ?!

Can you identify the Anderson hardware?

Can you identify what hardware this is?

I need a L and R tilt latch

Looking for a door keeper and a new screen door handle.

There are no markings or numbers at all. Thank you.

I need 2 of the guides for my Lawson windows.They are 30 inches long. On the part is 29DS. 38

I need to replace what looks like single coil balances. The number on the end of the coil is 6 28w. While only one is broken i would like to replace both the right and left one.I was able to remove the broken spring part.please reply with a quote so i can purchase.Thanks George

We have channel balances with wings on the top and bottom, but a shoe that's less than 1". A Swisco agent says we should use a custom shoe: 15-029 7/8" We need 4 - 2340 We need 4 - 2305 Full Length 24" Let us know if you need anything further. Thank you. Doug and Donna

Hi-Need some help with where to get the parts for our house windows. I will need multiple replacement parts for multiple windows throughout our house. Mainly, the locking mech and the plastic frames around the window. As shown in the pictures. Also included is the window label. Thanks for you ... (cont.)

I am looking to for this lock thats from my pella storm door but havent had luck finding it locally. Can you guys help.

Farley Windows Upper sash pivot pin The total length is 2 1/4" Length from top to 1st hole is 7/8" Length to 2nd hole is 2" This piece is hard plastic. The windows were installed in 2001

I am in need of this operating mechanism. It is out of a Quaker brand of french patio door. It has the multipoint locking feature when you raise the operating handle up. The only numbers on the exterior of the mechanism can be seen in the picture

I installed the balancers I received and as soon as they took the pressure of the balancers the top guides exploded. I attached a pic of what's left.

Paella sliding glass door rollers need replaced. Call Tommy

I need to identify the parts to replace the "plastic" clips that hold the bottom of the sash balance springs. These windows were manufactured in the mid 80's and have the vinyl channels on the sides.I would also like to find the vinyl stop that holds the double panes in the sash. I need to replace o ... (cont.)

I have a window with spiral balances. There are 2 balances on each side of the window (see photos). The window weighs 44 lbs. As you can see, the balances are 2 different sizes. The larger is 5/8" diameter and has a red tip. The smaller is 3/8" diameter but the tip has disintegrated so I don't ... (cont.)

I think my balance would be your S795 with a custom clip but need a take out clip instead of the screw clip Stamped number: 33D Quantity: 2 Length: 33'