Viewing all customer Discussions for:

Door & Window

Looking for a replacement lock to match this one (pictures attached). The customer is not sure of the make/model of her door. It appears to match the Anderson Reachout Deadlock 82-037 but we want to be sure.

Tube is 39" long and 5/8" diameter

Good Morning my name Troy I'm look to see if you could match this window balances I'm looking for quote for 400 and another for 100 at a time can you please sent me a quote and a lead time on materials. If you have any questions you can call me...Thank you Troy

I replaced the mortise lock for this door last year with a generic one from home depot. It didn't quite fit, so I had to cut some of the frame. It was a little stiff to turn the latch, but it worked. Fast forward a year, my tenant broke the lock, the latch, and part of the frame. I'm wondering if I ... (cont.)

This is a tandem roller on a Revere sliding patio door. Door is one of two sliders with 2 solid panels. Unit is 12 ft wide and 8 ft tall. Approximately 12-13 years old. Tandem wheel unit looks like your 81-156 model with end adjust. The 81-156 shows to be 1.5" width/tall on the carriage unit wher ... (cont.)

I need to replace operator and all parts including fasteners, stationary slide bracket

I have two windows in need of balances. The home was built in 2001. There is no make or model found. The metal channel (without the ends) is 31" long. The metal channel sides exact width is 19/32" and the bottom of the "U" channel is 9/16". Stamped on the channel was 3040 BSI DL. I need four of the ... (cont.)

I need to replace two, non-tilt, channel block window balances stamped 20-4 HP Caldwell, measuring 21" in length, 1/2" (9/16") wide. Thank you.

Hello, I need replacement block & tackle window balances. Mine are labelled " 30 5 JQ CALDWELL" on the back.

Wondering if this part is still made or what parts now would replace it without changing the holes in the screen door

Hi, I bought a casement window handle, but the holes don't line up with the old holes. Do you have any handles with 1-3/8" holes spacing? Thank you. Steven

Please, I need a replacement like the picture for a wi dow. Could you help me identify that part? Thank you Ana

I have an old sliding door and the latch keeper broke. I am looking for an replacement.

Hi, I need two of these for my storm door glass insert. The keep the glass in, not very well but it works but they're broken now and don't snap in. I can't identify them, can you assist?Kristin

This window mullion originally had clips that had a pin to put into belved edge of wood window but had an "extention" that would fit into the slot on 4 of the ends. I do not know the MFg of window or have any of the original clips to show you. In the screenshot 2024 pic above it shows a clip I hav ... (cont.)

House built in 1956. Original door. No #s or identifying marks Need rollers.

I need help identifying this door so I can order new door rollers. ThanksGlen

Hello, I am looking for this part or something similar for my windows. This particular metal arm is 9 1/8" from tip to gears. I am in need of a few of these.

Hi, I was wondering if you would be able to tell me which door handle to buy to replace this janky DFA door handle on my storm door? Tyler

I'm looking for a folding crank, either1-crank only2-crank and cover (not sure how to get the cover off)Thanks,Marty