Viewing all customer Discussions for:

Door & Window

My house is 30+ years old. The kerf for the wearer stripping is 1/4" wide by 5/8" deep. It is foam filled bubble weather strip. Do you make a replacement for this? My carpenter has not found one that has similar dimensions.

Snapped off the latch part and need replacement. 2 inch apart screws

Help IDing balancer sash is 24lb balancer metal length is 27" Stamp is 26-4 CALDWELL JL

I'm looking for a replacement for my tandem coil spring that has a broken pivot shoe. Stamped on one coil is 6k. The other coil does not have anything stamped on it and the sash weighs 28 pounds. I was looking at possibly replacing it with item S140-14. My concern is that my old coil spring housing ... (cont.)

The pivot shoe is broken on this window (double hung) and the bottom window will not stay up. Wondering what parts I will need.

Hello. These are windows on my sons house. He's looking for replacements for some broken ones. Can you you helps him? Thanks in advance for any help. There were stickers on the left side of the lower sash but they have worn off.

Several of the pivot bars for my ViWinco double hung windows have broken. Attached is a picture of the warranty label for the windows which shows the ViWinco product line as NCDH. I have been unable to identify the HCDH product line code agains the correct ViWinco product line and I am hoping you ... (cont.)

Hello, Looking for a part number for the following tilt latch: ".08" is printed on the retaining clip "pat 5,139,291" printed on bottom Thank you for any help you may be able to provide.

Two of these bar broke on one of our windows. The bar pictured is from another window which had the bars intact. I have included images of the bar, which looks similar to the Swisco 3 inch pivot bar (Product Code: 26-378) except the hole measurements do not appear to match. I have included a pictur ... (cont.)

Hi, I need to replace this operator. It is off of a white, bathroom window. See dimensions. I will need the handle as well. Thank you.

Original Aluminum Windows From 1968. Need part numbers for balance and nylon end pieces (see pics). Window Frame: ? 7/8" Depth ? 1" Width ? Internal channels to support nylon end piece guide tabs connected to top and bottom of each balance. ? No clips to assist in removal Balance: Supports a ... (cont.)

The only hardware I think is salvageable is the thumb latch and the 2 handles. Photo #1 shows weatherstripping I took off the door. There is also a profile of #1. Picture #2 is a stifff plastic with a cut out for the lock. This piece attaches to the outside of the sliding door. There is also a ... (cont.)

Think it's the S351-28 ? Thanks

I've got a tilting window with 22in plain channel balancer. They are labeled 21TG. The pulley mount is broken on one side. None of the preassembled balancers on your website match. The shoe appears to match a 15-014 but I think it is the top of the shoe that is worn away. The closest balancer ... (cont.)

I need pivot shoes for a Vinyl Max double hung window.

I received #32-032, EntryGard Dual Arm Operator from Swisco. And I checked the operator but the link arm measures 4-7/16" overall with a downward offset. I would like to have an EntryGard Dual Arm Operator with an upward offset arm. Please let me know the part number. Thanks.

The stamped number 2930

I am searching for replacement weather stripping for Amsco casement vinyl windows built in 2011. Attached are pics of the kerf/bulb profile, the sash edge view showing the kerf and one of the manufacturer's window tags. I have 10 windows to repair. Should this profile be no longer available I am ope ... (cont.)

BSI block & tackle non tilt balances Markings 29 9 bsi. 16 4 bsi Looks like style. S385. Bottom shoe is 1-3/32" deep Need 20 of the 29 9 bsi And. 2 of the 16 4 bsi.

23" Series 377 Channel Balance 2210. do the pictures I attached look like a match. thks Bill