Viewing all customer Discussions for:

Door & Window

I need half a dozen window cams like the one in the photo.Also note my email account has changed to:

We need to replace the spiral balances and lock shoes on window purchased in 1997. We also will need an adjustment tool. A photo of the window sticker is attached. Please advise the parts required and thanks.

Looking for one of these interior corner roller brackets for an exterior patio screen door.

After this new coil spring (9 lbs series 180) was installed the window will not remain in the open (up) position, although it is much easier to lift after it was installed.

Hi there sending picture of coil balance I have to replace . It's 1.1/4 And stamp on coil is 406. And 406 j

Non tilt channel balancer. 33c stamp on it

Afternoon, I'm looking to replace the plastic piece with the red circle in the picture. Unfortunately I don't see any markings on the window. I believe it maybe a Sears window as all my other windows are. It's a part of a bay window that cranks inward and outward. Thank you for your time. ... (cont.)

Any chance you can identify these parts and tell me part numbers to order. Thank you. Paul.

Hi, We have a houseful of Jed-Wen single-hung Jeld-Wen windows. We had a Tilt-Balance nylon cable break along with the housing that holds the nylon cable. I think I just need to order a pair of complete tile balances in case another one breaks down the road. I'm attaching a picture of the stamp o ... (cont.)

Hello. I am looking for the vinyl track replacement to this door. It is a United door and window product made in 2006. The door is model 3131. Thank u for your help.

window balances have failed. Top has a z shaped hook formed from sheet metal that clips to top rivet on balance and uses final fold in metal to hold hook on the rivet. 22F and 24F stamped on metal.I don't know if there is a better solution to trying to find exact replacement parts. Here's what I fo ... (cont.)

The rubber strap that moves the between-the-glass blinds on my Designer Series windows from 2008 is broken. Per attached photo, the hook broke off one piece so the spring detached. I understand the design has changed, and what I need is a drive system kit, 0E1U0000, but I can't locate it by that nu ... (cont.)

I am looking for the top of door hardware for a bi-field door that goes with the bi-fold door bracket pictured above. Stanley 2819 or you're pictured 23-306. Mostly the traveler round plastic wheel that fits in the track.

Need a part number for this shoe

It's for window it latches in the middle of the two windows

Hello, I attached these photos to see if you can identify the right balancer i need for our apartment building. We will need a bunch if you have the right part for us.Thank you so much for your help on this.

on a dble hung vinyl window with 2 coil balances per side would these coils be the same the apperar to be a 160 series one is marked with a 4 the other coil has no markings

These are right and left coil window balances in a SWC window approximately 20x40, up and down.

In need of replacement part number. Dennis

I need four sets of these tilt lashes I saw them on your catalog number 26 132p