Viewing all customer Discussions for:

Door & Window

Block n tackle balance 36”.

The lock quit working. It doesn't come out when you try to lock it. This is the most I can get it to come out of the case. V on one side. I wasn't sure what pictures would help the most in identifying it. I bought the house and a contractor put in the sliding glass door but I can't see anything hel ... (cont.)

The metal part is 18" long. Printed on the side is 1710 BSI TG

Product label and cross section posted. Customer requesting replacement.

Can you tell me if you have this type of glazing bead?

I need to know what balances I need to replace these as well as I need the shoes that attach to the window

1/2 inch wide

Could use some help identifying these for my single hung, internal tilt old MW windows. They simply slide in and out of the window frame, no screws.

I have a broken window lock. The cover says clear choice.

Looking to identify which part to order for a replacment. Thanks

Can you help me get the right parts?

The sliding door is original to the house. The house was built in 1965. The brand of the patio door is Arcadia. The rollers are plastic over steel. I used a caliper to measure the roller, and it is 1.25" overall outside diameter. The roller assembly measures 11/16" wide or thick at the top/bottom ... (cont.)

I only need the cover for this pivot shoe. One of them snapped in half where the screw goes in. Thanks

Hi I need a right and left coil spring window balancers. Both are marked 8. Can you figure out part numbers for me to purchase? Thanks

Looking for a cole sewell replacent handle for a door with the registration number as: 04229696043 23. Specifically the balcony part or the inside of the door. Inside handle holes 1 3/4", center hole 7/8". Inside overall length 3 1/2" Outside oval style trim 5 1/2" screw hole measurements. Handle ou ... (cont.)

Need help please on this product

Need 6' piece

Need part id for this. Has pat# 5.353.548. Approx 4" tall 1" wide. Tension seems to work ok, but upper housing broken. Also I don't see cut out to remove. Is housing simple to replace with that coil spring tension. A video reference would be appreciated. This window is traco series tr4200 dh ... (cont.)

This picture is of a smaller coil balance than I actually need. What is need is 2 of #13 and 2 of #14

Hi!! I'd love help identifying the top and bottom guides for this balance. Thanks!