Viewing all customer Discussions for:

Door & Window

21" slide on draw 22" slide on cabinet here are photos were can I get a replacement.

Bolt center is 3 15/16"

Can you supply these window locks? Need one ASAP.

Hi there I'm looking to order 3 sets of channel balances for my 20 yr old Patriot windows. The balances have 36B stamped on them and they measure 9/16" wide and 36" length. Thank you for your time. Please let me know if you need more information. Thank you!

I need to order a new locking mechanism for my door

Celco plus 1185-L Sliding door bolt

The doors have wide frame and I cannot measure the glass by #75-051 around door frame. For example, a sliding patio door of Pella has 4-1/2 inch wide frame and #75-051 can be used by only 3 inch frame. Please let me know how to measure the glass of doors. If you have another tool for doors, please ... (cont.)

Please confirm size and availability of pile weather stripping. Thank you

I need a replacement crank mechanism for a smaller Crestline window. The name listed on the crank mechanism is Truth. There is a patent number 4,840.075. On the backside of the long arm that connects to the window, there is a stamped number 40574. From the inside of the house, the mechanism cranks t ... (cont.)

Hi, I need to replace a few parts for a window that's not staying up when lifted. It seems that the coil balance fell through the support or something... Based on the pics, I think I'll be getting: - 15-191 pivot shoes (2) - S160-9 coil balance (2) I also need to confirm the support... should I ju ... (cont.)

I am trying to find replacement rollers for my patio doors. The part has PD41C on it attached is a photo.

28 inch

Length is 28in on the metal frame, end to end. Unit is stamped "2740 HA-BSI" and came original on home built in 1996 or so. Looks to be model S395-28 for $10.45/ea.Please see images. Thank you very much.Barry

Have finally figured out why the knobs to my exterior door to front porch keep falling apart: The set screw stem (or bar or whatever it's called) is about 1/2" too short. My 3-1/2 stem is 1/4" on all four sides and as I hope you can see, each knob screws into grooves on either end of the stem. Ho ... (cont.)

I have removed a fixed point part it is 1.25" wide and holds the coil. The coil is 3/4" wide. The coils are broken. There is no stamp on the coil The toe hold piece appears to move up and down the channel. The toe piece appears to be corroded as the part and window will not pop out like shown on the ... (cont.)

I am looking for 3 Tie Bar Guides for a MFR SNE Enterprises, Inc (TPC-1) Series: 924 Casement A-L-1 Validator Type Casement The Tie Bar is 85.5 inches long by 1/2 inch by 1/8 inch.

I have an 8500 series window that broke the coil and shoe, which shoe should I order? this is the bottom left side, the window when removed weights 18 lbs, on the shoe it has a 9, so I should get a 9 lb coil, right? the shoe is broken so which shoe replaces the one I have?

1) D10 7#27 680 16002 2) D8 7#27 380 16002 3) P19 12#31 80 11600 2

Can you help identify replacement parts for these items? Thank you. The part numbers for the latches are 1715-L and 1714-L. There are no numbers on the corner keys.

I need the lower LH window hinge. the arm is 9.5 inches (2nd picture) between the attachment holes, the other hinge is approx.7 inches between the slide rollers and the attachment location (3rd picture). thanks