Viewing all customer Discussions for:

Door & Window

I would like to see if you have this part. SGD-R20-144x80 this is the number that I got from the sliding door. Does this sliding door has a removable track?

I'm looking for sash pivots for this window tag

Del Mar double rollers. Part 53765

I have 6 windows where the old balance clips that attach to the springs have broken. My existing balances are 36" and say 36C BS1 on them. I assume I would need the 795 Balance 36" long. My existing cams are Open cams 1 1/4" shoe width. My exitsting pivot bars are the same measurements as the 26- ... (cont.)

5500 series American craftsman by Anderson window Mortise lock and handle with mortise latch lever, for patio door, to replace old parts. I hope you can see my 5 pictures. Thanks, Julie

The windows are PlyGem CertainTeed. The label reads June5,2008 1104380940011800000. I have ordered 409 series 170 coiled balance springs from you in the past for these windows. I had a representative from Ply Gem Windows look at them, and although the parts will not be covered under the warranty, ... (cont.)

I have luminess SL 6030 sliding windows that need new rollers but cannot see any that say they will fit my windows. Do you have any? My are nylon that are worn to the point they no longer hold the window up enough for the rollers to carry the weight. Would brass rollers work on my fiberglass tracks? ... (cont.)

I have attempted to attach photographs of the spring unit which I have removed from the window. These windows were installed in our home in 1988. I had previously purchased some replacement springs directly from the manufacture, but they no longer stock them. They advise that I could go online and l ... (cont.)

I have a Jell-Wen V-4500 vinyl sliding patio door. I need 2 roller assemblies for the screen door for this sliding patio door.

Broken casement mechanism. These are somewhat old. Need replacements

Hello. Do you guys have a installation guide for your RH mobile home operator replacement? I am looking at the window and it looks like I may have to remove the window from the frame to replace it but wanted to check with you first. Thank you! The post I purchased was the (1) 39-234 : RH Mobile ... (cont.)

replcement hinges

Hello! I purchased the S385 above and I am having issues with the window "catching" the 'heel-to-toe' of the channel balance. My window is a bit wonky but I am wondering if there is an identical channel balance but with an even longer 'heel-to-toe' measurement that would help with supporting the win ... (cont.)

Hi, will this fit the truth hardware model attached in the images below. Or is there a folding crank that is compatible.

Hi I need a few these 28 inch 2740 channel balance for my windows, can you tell me the model number?

I have a round hole on top and need to install a screw plug.

We are looking for Handle and Escutcheon Truth Encore Item # 38-208 on this measures 5 1/4" x 1/2". Is that something that you carry

Hi this is a top view of the lower sash of the double hung window that's tilted in. The release piece shown on the top has an angled tooth that holds the lower sash in place. You move the mechanism inwards to tilt it. This window is fine. I have another window where the angled tooth broke off. ... (cont.)

Hello? This is from an older screen door ?any ideas ? Ty