Viewing all customer Discussions for:

Door & Window

Hello, I am in need of 4 total channels. 2 are stamped 2040 and the metal channel alone measures 20-5/8". The other 2 are stamped 2630 and the metal channel measures 26-5/8"

Need to replace 1994 double hung window lock and keeper. 1 7/8 inches between screws. Made by company called Addison. If lock not available i actually need a replacement keeper.

I'm trying to restore the weather performance of 20 "Stormshield" double hung thermo-pane windows made in 1988, and installed in 1989 in my home in Vermont. I will be traveling thru New Jersey next week from north to south and back, and could possibly stop at your location to see/buy the gaskets I n ... (cont.)

Hi. I need two of this channel guide or a suitable replacement. It's 1/2" wide, and is 28" long. Thanks.

Need handle latch and weels for bottom of dfir

The pictures are the only info I have. The length on the pivot bar is 2 5/8 inches. The depth is 1/4 inch and the height is 3/16 inch.

This is the parts my customer gave me. Please help me locate a replacements. The color is light almond.

I am replacing the springs and shoes of my vinyl windows. I have the right springs but need to identify the shoes I should get. These windows were made around 2006 or 2007. There is a marking on the face of one that says Pat Pend 5300SB on it. See it on one of the photos attached. The braking m ... (cont.)

Stamp= 22 2Make: AtriumI need the balance bottom.I believe I need balance feet.

Single side non tilt balance, marked 2830. Unfortunately the foot part is broken so it's hard to match to the photos. It doesn't appear to have anything on the back side, but it's close to the s370 model. 1/2 wide, 29 inches long.

Looking to buy some window pivot pins that match these in the picture

Need right and left side. (Bent) Also handles just spin around

Rollers are in 4'x8' aluminum framed mirrored closet doors. 1 1/4" plastic rollers in a 1/2" wide, 1 7/8" long, 1" tall metal frame

Hi, I am a builder and I need to find a handle for a new sliding patio door. The door belongs to a customer and there is no name of a manufacturer on the door. I have attached two pictures and wanted to know if you would have a handle that was white and would fit this door. Thank you Dave ... (cont.)

Crest o pane windows installed in 1977. Windows are foggy, cranks are not smooth and locks are tough to close. Would like to know the replacement parts for all of these. There are windows that open the other way so cranks are opposite.

I have two of these assemblies that could use a refresh. (One opens left and one right). This one in particular has a gear that's stripped meeting the shaft. Do you have an entire replacement assembly?

The metal part of this items measures 29" long. Stamped on one end as 2840 BSI FL. I anticipate needing 4 of these. This is my second of two requests to identify my parts.

The metal part of this items measures 23" long. Stamped on one end as 2290 30. I anticipate needing 4 of these. This is my first of two requests to identify my parts.

Have no idea who the window manufacturer is. Can't find anything on the window. Is 38-036 my best option?

Hi I am looking for this parts for my bay window. The parts is broken and I need to replace it. Thank you.