Viewing all customer Discussions for:

Door & Window

Please identify the wheel in the picture so I can order them.Thank you John

My windows have series 180 coil balances with 15-087 coil housing and 15-086 tandem coil housing. Can I replace this system with series 160 coil balance system and if so what parts do I need for the replacement. Thanks, Gary

Hi there - I have older vinyl "insulate" brand windows that have a top slider to lock the window, but most of them are plastic and broken, and there is no replacement. I'm considering using a vent latch like this and using a drill or something to "cut out" part of the casing so that these could sna ... (cont.)

Greetings, window won't stay up. I have 2 broken Springs and appears the shoe is failing. I would be so pleased if you could give me the part numbers.

I am looking for Viking channel balance replacement. 21" length not including end pieces. Stamp says 2040. Please advise. Thank you!

Vinyl window slide, both right and left side. Home is about 30 years old We have ordered from you in the past and wish to verify part type before ordering. Antoine

Hello, I'm hoping you can help me find replacements for these old style window valances they all seem to be failing at the same time. I hope you can help me after we locate a possible equal replacement. You can instruct me on how to measure so we can order the appropriate ones.Thank you so muchAlis ... (cont.)

The 82-265 on your site looks pretty close to what I need but maybe you can confirm. Attached photos of the door cavity with lock removed and the lock mechanism with the faceplate. It is 11.75" and appears this will be a fit. Will place an order if you think this will work for my application. THank ... (cont.)

I don't have the brand or name of the windows. Just a logo of uniframe. It does look like if I pop the top or bottom cover it has a cutout to remove the pivot shoe. Looking for replacements and required tool.

Hi I need replacement Patio door rollers any idea where to find it ?

Hello - I am trying to find a replacement lock / keeper set for a Jeld-Wen window. They are recessed and flush mounted into the window sashes. The lock has the numbers 45202 and 45204 on it and the keeper has the number 41276 on one end. Are these SWISSCO parts? If so how can I order replacement ... (cont.)

I am looking for a replacement for some existing double hung window locks. The original locks are from an aluminum framed window.I can provide additional photos if necessaryJim

I need to replace one of the plastic tilt latch mechanism that is mounted on top of the lower window. It has a spring loaded sliding tooth that slides into the vertical channel along the side of the window to keep the window from falling forward. It is the part that you use to tilt the window inw ... (cont.)

Hi, could you help to find the replacement part of these windows balance and shoe. Thanks.

Need to find replacement pin part as it's missing. Can you please provide a picture of what it originally looked like? I also see suggestions that 82?078 could be a good replacement option, but would like more pictures of that before purchasing. Can you please provide more photos of that item from ... (cont.)

Hi. Just bought a house with old aluminum frame single pane glass dual hung non tilt windows and trying to repair them. The existing channel balances are are 26 inch long (including top and shoe) and 25 inch long for the metal frame. The larger windows are about 14 pounds and have balances that ar ... (cont.)

Hi. Just bought a house with old aluminum frame single pane glass dual hung windows and trying to repair them. On 2 of the windows the upper right white plastic corner window Sash Cam is broken. See pictures of another window with the white sash cam (not broken). If you could tell me what the cor ... (cont.)

Will 82086 key lock work with my existing mortise lock? I have a jeld wen sliding patio door with no key lock. It is a single latch. Thanks. Bob

Hi the photo show a good window, the one with the part missing it has the cable lose, please help me identify the clips is a pella window, thank you

Needing keeper for various WINDOWS in home. The keeper is flat 2-15/16 length and 2-5/16 center, picture shows the keeper (top) against the window but missing or broken support center piece on keeper for the lock on some windows. Need to replace several in household. Thanks