Viewing all customer Discussions for:

Door & Window

Does the 82-033 go with the 82-211 mortise latch? The diagram for the 82-033 shows the outside handle height as 7 3/8 inches. The inside of my handle is 7 3/8 inches, but the outside is 6 inches or 65 1/8 inches tall.

My window is non-tilt sliding, the 1/2 inch balance measures 28 inches metal end to metal end. It has a 1 1/4 inch non-winged tip (top) and a 1 inch winged bottom end. The balance has stamped on it: 27 4 KQ CALDWELL Do you have a compatible replacement ?

Hello, The sliding door is missing the latch to lock it and my screen door lock is busted. Do you have these parts?

Hello. I was just at a property where an elderly lady has damaged balancers that are no longer functional. Here is the number from the part. It is labeled as 26 4 Caldwell JL. I'm looking for 12 of these for six windows and the other one is labeled as 14 9 26 FL Caldwell. I'm looking for 4 of these ... (cont.)

Do you carry this snap bead for windows

I have a house with many Pella windows and screens, installed on 2005. Screens are vertical 25.5x43 inches and marked Pella 320c on the screen frame. Most screens are missing 1 to 3 latches. I need to find replacement latches and installation instructions.

Looking for a locking lever for 2012 Loewen casement

Simonton windows 20 years old. Number on back is C-1040-9A On swing arm there is F-1040-16 B

I need dimensions for your Series 152 - 7 lb coil balance springs please. I need to buy a coil spring of 1/2 inch wide, max diameter of 1-1/4 inches, and with a length of around 30 inches. My window sash weighs 14 lbs (on bathroom scale) so I want to buy 2 x 7 lb springs (one on each side). My or ... (cont.)

my balance is marked 2has a 1 inch shoe and a 1/2 inch channel

Need new balance bars and the metal tabs for windows. Need part numbers to order.

Hard to read the number clearly, but looking at the photo of the sash balance (included above), it looks like R127827...??? The windows were installed when the house was built in 1989. They are wooden and just go up and down vertically. The bottom window has 3 rows of 3 panes each and the upper w ... (cont.)

I need a replacement for a balance with the part number 32 4 BW CMC 2. What is your equivalent part number? Thank you.

Please let me know what part I need to order and provide part number. Thanks!

I'm trying to replace the knife clips and the metal tabs on my sister's screen windows. I think I have found the clips. (I'll take a picture anyway) but not the tabs. Thanks, Elaine

Want to order six(6) balances with a balance clip attachment instead of what it comes with.The balances are S795-27 option 27G with the 15-198 Balance clip attachment installed.

Hello, my sliding screen door has a broken part. The plastic piece in the corner is broken. The tiny piece the roller attaches to broke off. You can see the piece still on the roller part. I do not know how to get the plastic piece out. I removed a screw, but it won't budge. This is for one of the ... (cont.)

the opener is from an Anderson Window. From the rivot on the end of the arm to the center of where the arm meets the mounting bracket is 14". The base is 5 3/8" wide. It has the following numbers on the top of the arm: 1 361 485 R & 1 361 482 HOP It has the following numbers on the underside of t ... (cont.)

i need 2 29 9 of BS1 channel balance

I need to replace window locks for 6 windows. There are two locks per window. Windows tilt-in. Locking part of is 3 inches long.