Viewing all customer Discussions for:

Door & Window

I need the little black piece which attach the levers the the window

Hello, I'm replacing the balance rods in milgard style line windows. I'm pretty sure the balance should be S795-32c but mine has an indent at the bottom that yours doesn't. I also want to replace the shoe which I think is 15-236. Can you please confirm before I order. Thank you

Hello! Thank you for helping me out here. I'm based in New Jersey and am looking for two replacement handle brackets that are made of plastic. I understand if they would need to come as a set with the handles. Measurements attached - can you help me identify replacement parts? I'm not able to see ... (cont.)

Hello I would like to replace my drawer slider with metal slider is this possible?

Hi folks I need your help with a part for a Pella casement window. I need the little plastic part that holds the operator arm to the track on the sash. Also looks like I'm gonna to need the top hinge arm too. It opens on the right when your inside.

I'm looking for a right side replacement latch for our Milgard single hung window. I contacted Milgard and they referred me to you. I'm attaching pictures of the broken latch, and the latch location on both sides of the window. The broken latch has some identification on it, however the window has n ... (cont.)

I have identified the replacement part as Truth Dyad Operator 39-315. I suspect more parts are needed such as a 1. Truth Snap Stud Bracket and 2. clips and a 3. handle. I think I need these other parts, Is that correct? If so, What are the part numbers that I need to order the remaining parts? ... (cont.)

These are corners from a Marvin casement window screen - about 15 years old. Can you identify a replacement?

Have a ten year old door wall need the upper roller for the sliding screen

1. The U-shaped metal channel is measured 21" long (metal to metal edges) x 5/8" (width of the opening) x 9/16" (depth) 2. The weight of the lower/movable panel of the single hung vinyl window (without the 2 balances) is 13.2# 3. Attached photos include the balances' entire front and back views, f ... (cont.)

First picture is what it looks like, second is the broken one. It is on the left hand side of window. I would like to order 2 pieces please, please let me know if you need more info from me ?

I can only find 6" brackets, I need 4.5". Also need a 10" piston.

Please help me find out what model is this? Thanks

Hello. I am looking for several latches for my tilt out vinyl windows.

I have an enclosed patio and all the gasket has shrunk. The windows need to be held in by this. Do you have a replacement?

Hi please let me know if you can match this part . I need everything that comes with it thank you .

Hello, I can't seem to find rollers with this kind of extension. I tried to unscrew the extension entirely and couldn't get the screw out. Any suggestions? How do I replace these rollers? Much appreciated!

These strips hold window of larsen storm door in place from inside. Probably 10- 15 yrs old .

Need help finding a replacement handle. Please let me know if you carry and if I can purchase to be sent to Sant Ynez California. Thank you.

Hello, I have two vinly replacment windows and it appears that the window pivot is needing to be replaced if you can help me with the selection. In two of the images you can see that the metal bushing has fallen out of the broken plastic surround. The other image shows the pivot intact however it' ... (cont.)