Viewing all customer Discussions for:

Door & Window

The metal is 30 inches long. I need 2 of them.

this is the deadlock and receiver on the door16cfr1201 ll CTG tempered sliding glass door sgcc-1805-5/32u

Hi, I need a replacement handle for an older Emco storm door. Photos of the door s/n, inside and outside are included. Would you please make a suggestion of a replacement part set? Thank you.

These are the ends of my channel balances. The balances are stamped (23 3 BP Caldwell). The metal part of the channel measures 24 inches.

I have a Guardian sliding door which needs a wheel replacement.From the printing on the glass verbatim: Guardian Geneva NY ANSI Z97.1-1984 Safety Tempered SGCC 2259 I/8U BS 6206:1981 16 CFR 120 II Can/CGSB-12.1-MFirst I need to figure out how to remove the door. Second I need the new par ... (cont.)

nami pwg-170-00139-00002

Hello! I need a replacement for this broken handle. Can you please direct me to the proper hardware? Thanks!

Hi,I am hoping you can help me. I have a Crestline crank-out window from about 1992. When I am inside, it is on the right side. So, from what I read, I guess I need a left-side thingy! Anyway, the window will no longer open. The crank just goes around and around. I switched handles, but that did not ... (cont.)

There are 35 homes in our community that have Simonton windows. They are aging and replacement parts are needed. Simonton has limited resources on who can service their windows.

Can you please give me a call back with a part number

I need at least 4 of these, and probably could use even more, but the other windows are functionign with semi-broken parts right now. These were windows bought via Sears probably 15+ years ago.The tabs that keep the top sash from coming all the way down are also broken, and I need 2 of those on thi ... (cont.)

Hello I need to replace some Vinyl window sash stops that have disappeared over the years. Can you help me find the product to do the job? I have attached pictures and a diagram with the measurements to help. I was looking at Part# 55-043 and it seems that this product is a close fit? Thank you for ... (cont.)

Hello. Please help me to identify this. Thank you!

Does this lock have a button lock from the inside

Missing one of the retainer clips that holds the screen in the window I will enclose photos of model and zero and the clip can you help me please

Please let me know if and when I can order these thank you!!

MorningI require two (2) 29 inch channel balancers Part #2830 with a 19-005 top and 15-029bottom. Thank you for your help and assistance.Roger

Broken part from windowpanePivot bar

I need to replace the coils and shoes for 3 windows. So I would need the right and left. (I've attached a picture of all the parts I need). There is a marking on the coil that says 408 J. I've also attached a second picture of another part I need measures 3 and 1/4 in length. Again this is for 3 ... (cont.)

I need a replacement crank for a Thermal Gard window. I see a number on the window 30752-8