Viewing all customer Discussions for:

Door & Window

Not sure what the parts are called. The part that broke is attached to the lower track that hinges the window. Not sure what parts are needed. The window can still be opened and shut, but it wont shut properly.

What is the distance the outer edge of the stile to the center of the key way?

My problem is that the sliding door to the terrace moved a bit and was blocked. I disassembled it and found that one of the 2 wheels was broken, the metal support.The photos are of the one that is fine. The measurements of the rectangle are 76 x 16 cm and the distance between anchoring centers (hole ... (cont.)

Looking to replace the Pivot lock shoes on all our windows. Each time I have tilted a window to clean it, the metal insert in the shoe breaks. Pics I sent are from 24x40 window, but most windows are 33x60 - I assume the pivot lock shoes are all the same size? I would like to do this myself, but wo ... (cont.)

Hi, Several of the Spiral Balance Pivot Lock Shoes on two of my windows are cracking, falling apart and need to be replaced. The stickers on the windows are very faded but I was able to figure out that they were installed in 93 and 94... The Shoes themselves have the marking of 590C... I measured ... (cont.)

I am looking for replacement handle and faceplates (or entire assembly if needed) for an old EMCO storm door. The 2 screws on the faceplate are 6 3/4" apart. I have found options that are 7 1/4" apart, but nothing that fits exactly. Do you have something that would match, or do I just need to drill ... (cont.)

Broken balance coil and where it attaches to the frame (clear plastic part)

I am having trouble matching my old parts to anything in your catalog, hopefully someone there can help find me the correct replacement corners, thank you

Moss brand window installed in 2006. Clips holding spring in metal channel broke. Marking on channel has 34S. Pictures attached for reference. Any help/suggestions greatly appreciated!

Need to know which double coil springs and shoes along with the pivot bars I need. I need to replace both sides of the windows. I have 4 windows I need to repaire.

Can't tell who is the window manufacturer.

Here's another example took apart

Hi I am looking to buy coil springs for my window. I attached the windows information if it could be of some use. It is a 33x40 vinyl window and looks like it uses your Double Support Detent Clip Product Code: 15-181 and Coil Balance Shoe Product Code: 15-180. Would you happen to know what spring ... (cont.)

I need to replace the coil balance and tilt latch in my vinyl window. The coil snapped. The coil has 6kg imprinted on it and the coil housing has a 6. I probably should get the clear plastic mounting bracket too. Also the tilt latch broke. It looks like it's a corner latch, maybe? I'm sending photos ... (cont.)

I have several of these vent stops broke on windows how do I know these will work and how do you remove and install them

I think the 11 inch double latch is what I need. Just wanting to confirm

I am in need of replacement window cranks for what I believe are Pella windows. the etching on the windows reads: IGCC CBA IGMAC, INSUSHIELD, CIG 2 2-04

Do you have corners like this? Or alternatives that would work with this type of frame?

Looking for replacements for 2 windows. I pulled the old ones... stamped with: 36-4 AA CMC 11

I have the mortise lock, Adams Rite Mfg, a 5 is stamped on one side. holes for mounting are 2 17/32 apart The key lock part in the picture has 7145-2 stamped inside. The bar which goes through the mortise lock may or may not be broken and too short , 7/8 inch sticks out of lock.. I am missing the l ... (cont.)