Viewing all customer Discussions for:

Door & Window

Need help finding a replacement for this handle. Likely 11/32, but when we purchased the crank closest on this site, the handle didn't fit on all the way, and it slipped so it clearly wasn't fitting into the grooves as it should. Any help appreciated!

What piece do I need for this window lock?

I can't find the part number I need.I've attached all the photos of the old part.Please tell me which modern part number corresponds to it. Thanks

Hi there, the holes are 3.5 inches apart and the Pull part has broken off so is miss from the picture! Thanks for identifying.

Hi, I have this swing arm for an awning window that I am trying to replace. Could you help me find the correct replacement? Let me know if you need anything else - I don’t have easy access to the window itself, but I removed the part.

These windows were purchased from Home Depot in about 2012. Window balancer is stacked (refer to picture) each stacked balancer has a 6 printed on it the bottom balancer is longer than the top balancer. Balancer seems to be 2 1/16 wide about 3 7/8 tall.

See attached pictures

Need replacement tilt latches for two of my 1996 Simonton white vinyl windows. The attached photos show the top length is 2 5/8", width is 9/16", and height is 3/8". My tilt latches look to be the exact same size and shape as the Swisco 26-419 and 26-420 tilt latches. Before ordering I wanted to ... (cont.)

The plastic connection from the cord to the spring w/i the channel broke. Google tells me the NL BS1 marking is not for tilting windows. What I should order?

Hi good morning, We are lookign for this window latch. Would yo ube able to help us with this? Thank you!

I need to replace some balance tubes on my Marvin windows. I believe the Balance Tube number on the Nook Window is 16B 0L and the Balance Tube number on the Big Room Basement Window is 16B 0H. I think I need the Balance Tubes for the Upper sash as the upper right corner of these windows is sagging a ... (cont.)

I have Bonneville windows likely from 1995 and the first 2 pics I attached ("1c - 20250817_145005.jpg" and "2 - inside crank and Bonneville sticker.jpg") are from my bathroom window where the small hinge's rivet rusted off. The next three pictures ("Angled hinge & hole.jpg", "Bottom hinges & ... (cont.)

My outer stash is holding on 2 stoppers and it's hard to move up ! If I fold on stopper it's going down and I need to remove inner stash and ask helper to move outer one up

Can you help me find the correct channel balance?

Looking for the sash replacement. Has 2040 stamped. Approximate length of channel is 20 - 11/16 inches and width is 9/16. If I am correct, the item number is S350-21? Thank you

I'm looking for these

I have a similar handle and need to find that part that the handle marries to in order to lock, as it's missing. Any help?

I am replacing two window balances. I have them and installed them, but noticed one of them wont "catch." I looked to see why, the left side is missing this clip on the top corner of the window. Its a little black plastic peice that screws into the top corners of the windows, and the balance catches ... (cont.)

Hi all,I have attached three pictures of my window hardware. I have not been able to find any names, numbers, or markings. I'm hoping that y'all can help!ThanksTim

The slot in these shoes is molded in vinyl, which has embrittled I will probably need to consider new balances at the same time for these windows.