Viewing all customer Discussions for:

Door & Window

Please help me identify so I may replace the hardware pictured

I just saw tilt latch had a number on the back.

Hello, I've been unable to find an exact replacement for this- I need 2 of them. The metal part measures 15". The stamp is B.S.I. 1420 and there's a D stamped on the metal roller piece that is hinged. Thank you.

Trying to identify a part on our old metal windows. This piece attaches to the window balance and is screwed into the bottom of the window sash itself. Photos attached

Looking to replace a pair of channel balances. The action to open or close the window is still too heavy after taking the window apart and thoroughly cleaning and lubricating the surfaces. One of the channel balances rope-pulley squeaks. The markings read 13 5. The weight of the window is 12.2 lb. ... (cont.)

Window balances are non-ribbed u-channel 36 inches long with the number 35e stamped in them. I need to remove the entire side plastic insert after removing both windows to install or remove balances.

holes are 1/2 inch apart and juts out about 1/4-1/2 inch.

Good morning, Do you carry this kind of Trigger Pull Handels for storm door? Thank you

35D, BSI TP

50 year old Anderson window crank handle broken, can't bring windows back in . Window can crank out

Crank 2121 R1 Lock 2035 Hinge 32150

I need 5 of these handles and was wondering if you can help me identify the part I actually need. Thank you

Hello, I need 2 new window balances.

I need help identifying a set of window latches. I cannot find a latch that has all of the same measurements.

This jalousie crank is/was actuated with a pull chain. There are three gear cogs, one is attached to the pawl arm that in turn raises:lowers the rail holding the glass louvers. Broken tooth, so no workie. Not sure what my repair part options are going to be?(Edit: "Pawl arm" not panel arm.) ... (cont.)

Need to find covers for these windows. Don't know manufacturer

Need window channel balance replacement. All information I have is: "2230 BSI VN." Thank you!

Team, Do you have these rollers in stock?

26" Series 385 (S385-26 Option 2540) Channel Balance with an extended travel (roller in it) bottom fitting

Hello thanks for your help. Also, I wanna mention that old hardware is stamped to 2930. But I couldn't find that exact match on your site.