Viewing all customer Discussions for:

Door & Window

30" x 1/2" 2950 cj code embossed on side see photos need one set of two for only one non-tilt sash window

This a photo from one side of one myAnderson windows in the garage. I have 2 windows and they both need replacement. House was built in the late 80's-early 90's. What part will I need, I assume 24-13R. I will need 4. Does 24-13R work on either side

The piece is 1 inch and secure window screen in place The white piece is the latch. Will you be able to suggest replace? Thank you.

Plastic part that running window on top of window in the frame.

I can not find any identifying info on these.please help

Need new track for sliding glass door rollers. The doors are wood, not sure of the brand, glass stamp reads cardinal glass. Thank you

I need this interlock for the windows

Marking on metal channel: 2430. Metal channel is 25 in long. Both ends are winged. Window is old WindowMaster. It does not tilt. Channel width is 1/2 in. I am guessing Series 385. Looks like bottom guide is 1 3/32 in. My top fitting is black in color.

Hello, I need help identifying a replacement mortise lock for my sliding glass door. The existing lock has two hook bolts. The lower hook appears to be broken/missing, so the door can still be pulled open even when it is locked. I have uploaded photos of the lock installed in the door, the removed l ... (cont.)

Hello,I have a window that weights 15.4 pounds. I need two complete window sash block and tackle balancers as pictured. The metal end to end is 30" long. I also need 10 of the pieces on both ends of the balancers and the retaining pins. Lastly, I need 20 of the pieces that go in the corners of the s ... (cont.)

When I went to remove the screen to clean the window, the latch snapped. I need two of these latches

I am looking three left Hand window and five right Hand window, Please see the picture and give me the detail.

Markings are 22 3 Gx cmc 11 34 4 be cmc 4 31 3 gx cmc 7 34 1 cmc 11 I need a total of 34 20@35" 2@35" this window is heavy 4@32 8@32

My awning operator will only open not close the handle has a marking of 11500-11. it is a left handed piece which measures 5 3/8" top to bottom. the bottom piece measures 2 1/8" wide. it has 3 screw holes one at the top and 2 near the bottom. Note the bottom holes do not line up. Let me know if you ... (cont.)

Trying to identify parts

I work at a glass company and have gone through all of our vendors and companies we can think of and still can't identify where this glazing bead might have come from

This appears to be a guide fastened to the side of the window casing to assist with locking.

im looking for replacement stops. I cannot find the make of my windows and have looked everwhere on line. im not familiar with windows but learning

Which internal tilt latch is this?

Hello, Do you have this? Thank you!