Viewing all customer Discussions for:

Door & Window

Hello I need to replace two Duraseal window locks that the handle broke off. The window is labeled Duraseal L5 071519 1121. full width of lock is 2.75 in

Hi, pls see the pictures attached. We are looking for this crank handle replacement, do you carry this kind of window crank handle or something similiar?

Unknown window manufacturer. Bar is cast but would prefer to replace with stamped. bar is 3.658" long and 0.7" at widest point. 0.2265" tall spring is 3/16" wide and 1.5" long. as seen in photo bar has numbers 8276 2 and 580002 written on it.

Republic Window and Doors. The piece is 26in, the window tilts. The top part broke. I believe it is a block and tackle. Do you carry this part? Thank you

Hi, I have four wooden single hung windows that have broken springs and string. I believe they are Anderson windows from 1987. I didn't find these channel balances on your site the spring is 6 inches and the channel is half an inch. Thank you

They have two metal con cave wheels and a hole for a screw on one side

Stamp 29 4, length 29 1/2", metal only Manufacturer I believe is Best Built, , installed. Approximately 2005-2007need 2 balances, have more photos if needed

The interior handle broke off. As pics show outside has the push button to open as well as lower lock. Only markings on inside latch says ZD IDEAL.

9/16 thick and 1 5/16 wide Thank you.

I'm looking to replace my current channel balance, it's length is 30" it's width is 1/2" and it's stamped 29-5 EN5 CMC. It has a winged top and a non winged bottom. Thank you for the help!

I have a customer looking for the parts as in the attached pics

Part 8314 single roller, 11/16 x 2 inches by 1 1/8 tall

Hello, I need to order a 3 sash locks for one of your casement windows. I am a contractor, and have your windows in my own home. It was easy to figure out the issue with your video that was on line.

Channel balance 2040 21 inch and the second picture is a clip for it

need two pivot bars pivot shoes and retainer button

This is from a Quaker window installed in 1999 in our house. It measures 25 inches long and the end is green in color with 2 notches. It is an aluminum tube with the letters CSB 1 on it. Do you have these?

Seems like the number on the balancers is: D46 7#27985. Can you please confirm this from the 2 photos! Looking for 2 of the correct replacement parts. Thanks!

I need to match 4 of these, it looks like a 351 and 390 to me. Any guidance on the correct part would be greatly appreciated. -Andrew

Need replacing them. Windows will open but not close.

I have a green tipped, 28", 3/8" spiral balance. Which series should i order it from? It looks the most like the S600