Viewing all customer Discussions for:

Door & Window

looking for replacement parts lock,handle and operator

Need the part in 3rd pic the plastic with screw other sliders missing it so they wiggle. Please help I don't know the part or name but sliding glass doors wiggle cause that's not there I need 6 please disabled can't afford new doors

The spring loaded pin is 1-3/4" long. It is ~ 3mm (~3/16") on the inside of the screen frame and ~ 4mm (5/32") on the outside of the frame. The frame width itself is 3/4" wide.

The handles keep sliding off the bolt, I think because the set screws do not quite fit into the holes drilled into the bolt. Do you sell replacement bolts? handle assemblies? If not, could you refer me to someone who might? Thanks much. Bruce

looking for Simonton balance. 4 of each Part #909010. Patent # 5,232,209-5,365,638-6,584,644 62 in black ink 12.5 Second balance has in black ink 11.5

Hello, I'm looking to identify the type of weather stripping and size that I need. The part that slides into the channel appears to be about 1/8 of an inch. I could not remove it from the window as it was very old and brittle, so I measure the channel in the window. When I would try to pull it out t ... (cont.)

Hello. I am looking for the window operators in the attached pictures please. I need both left and right side operators. Can you assist pls? Thank you

Need help in locating "Push Tabs" that lock in older (Rivco ?) Town & Country Screens. Would need instructions on how to put those things into frame as well....

Need help identifying weatherstrip for 20 yr old Anderson casement window. Thank you

I need 2 white, right handed roto covers. I don?t need the cranks. Do you sell the roto cover separately?

I hope you can help me. I "think" my windows are single-hung Patriot windows. I purchased this townhouse 4 yrs. ago, and I believe they may be the same windows that were put in when built (so at least 20+ yrs.). The tilt latch has broken on several of the windows. I've included pics, however I d ... (cont.)

where can I buy handler

Greetings, In replacing a window we lost the Entry-gard (Truth) attachment to the window. This is an old 1999 Caradco window and have not been able to get a replacement hardware for this casement window. I've attached a photo of the casement hardware on the window and a photo of the dimensions. A ... (cont.)

The crank is busted but I think I need the entire part. There are no brand names or markings on the window to identify the brand or manufacturer. The window is in a residential loft. Thank you for your assistance.

Looking for locking ring or replacement handle. Falls out while cranking.Thanks.Steve

I need to replace several top latches for sliding ( tilt out to clean ) windows. Also the second photo shows a type of ?clip? that pushes into the edge of the window to hold the screen in place (on the interior side of the window). I need several of these that have gone missing over the years. ... (cont.)

I need a custom order for 2 channel balances. Part stamps: 20 2 BSI PR. The shoe and tops are the same as your series 385. Thank you

Attached are photos of my patio door lock. The internal mechanism has broken, so only 1 of 2 latches work. It looks from the dimensions that your 82-265 lock might fit. My set is only 5 1/2" (vs. 5 11/16" on your photo)for the distance between catches. What do you think? I can send more photos ... (cont.)

I'm looking for the PART NUMBER for this old cascade windows 04/05 keeper. Can anyone give me some insight?

I just received the balances from you which are great.Unfortunatly, I didn't realize this part was bad on the sides of my window.Can you get me 2 of these?They screw into the window frame.see picsThanks,Jack32 mm high15 mm widewings are 5 mm each