Viewing all customer Discussions for:

Door & Window

I'm looking to replace this

Hi, I need to order two of these 2830 channel balances, but not sure which ones are correct. metal part measures 29". Please help!Thanks, Phil

No names or markings on these. Old (1994) Alpine windows. Most of the stops have the stem that swings out to stop the window from being pushed up all the way have broken off. measurements: 2 3/4" long and 1/4" wide. 2 1/4" from center of top screw to center of bottom screw

"26 4 CALDWELL GM" on one and "26 4 CALDWELL JM" on the other. No other numbers or markings. These are channel balances for old (1994) Alpine windows, white vinyl, single hung. The metal portion is 27" long (without the plastic tips) and the back spine is 1/2" wide.

Need plastic curved latch to open and close screen doors, they broke off

How much to replace the attached I need it in brass

What do you have that would be comparable? See photos which hopefully will help you decide or advise.

We have a 3/8, 17 inch 400 series type rod that a spring broke. The window measures 18x30 and is an late 1960's aluminum frame non tiltable construction. The color appears to be a natural nylon color. Slightly off white. We got them out. We can not remove the lower frame. Bolts at the top. If we ext ... (cont.)

I need to channel balance to replace so my window will lock correctly

From what I could see it looks as if your 82-008 model would work for my door, yes? I would also need a new lock too.

I need, if you have it, a set of rollers for my glass sliding doir

Here are some pics of my broken roller. Please Help me find them. Don

I need to identify the correct block and tackle balance and also the plastic clip on the top of the window. Came out of 1980's non tilting single hung window. All are marked with what appears to be a length number in inches followed by a "D" I will need many of the balances and also many clips. ... (cont.)

I need a pivot bar and tilt latches for this double hung window that I sent a picture of the bar code. Thanks.

I need to purchase the weather stripping in the above pictures for the aluminum track holding the windows on a curtain wall on a commercial office building. Thank you Tom

We are looking for a gear box that matches this one on picture. Name on bottom roto i4600. Do you carry anything compatable? Thanks

Hello, Any ideas what a 14B stamping on my channel balance designates? The channel is 15' long, but what does that 'B' stand for? Nothing else is stamped anywhere. Cheers Shouk Montreal

Hello, I like to order channel balance 2340, 24" series 385. It is not clear to me if top and shoe balance are included or i have to order them separated. I that case is it possible that Swisco can make the balance with top and shoe for me. I send hereby pictures of top and shoe. Sincerely Yours M ... (cont.)

The bottom guide of this metal, louvered door needs a new guide that has a nylon tip, it's worn off completely. I cannot find any labels that have the name of the manufacturer, but they were located in Roseville, Michigan. The doors are very old. I'm the second or third owner. Also I'm somewhat hand ... (cont.)

Our latch in our door broke off, attached are pictures of our latch mechanism which differs from your video. There are no apparent screws for the inside handle. Do you have a replacement part for our model and how does the inside handle get removed. Thank you. Marcia