Viewing all customer Discussions for:

Door & Window

Single roller

Need to replace both side balances for this window. Unknown weight. The metal length is 25 11/16th and the total length including plastic caps is 27". It is 1/2" wide. The stamp says 25.4 B.S.I. pc

Hi there, Can you please help me identify the correct replacement part? Thanks Scott

we are looking for this balance its 29" from end to end Need 2

Window balancer replacement it has the number 27 there is a space and the number four

Window crank 40055 33254 Kk Truth

Hello! We had several sliding glass doors replaced about 12 years ago. One of the doors was always ihard to open. The installer adjusted it at one point, but it didn't really help. Now the door it just about impossible to open and close. My husband thinks the roller was faulty. Unfortunately, t ... (cont.)

It's 29" and a square channel 9/16?" wide. Not sure

I'm going to need about eight balance Springs total. I'm starting with this one and I will upload photos for the others. Although I think they all have the same plastic piece at the ends because they're all Viking brand. This one pictured is 23 in. The others are 29in. Four of the 29in are 2840. And ... (cont.)

Please identify correct replacement parts for the attached single hung balancers. The tape measure in the picture is a metric one. Thank you for your help. Yuko

looks like 81-157 has 1-1/4 rollers body is 3in long onlydiff i see is yours has extra small horizontal window?

Please ID the top tilt lock if possible. Can I buy replacement parts?

This photo is a spiral balance 29 inches long by 1/2 wide with a bottom bracket that measures 1-3/4 inch by 3/8 inch. Would a replacement of a series 400 balancer with a bracket #14 work as a replacement? If not, could you recommend one.

Hello I am looking for a pair of window balances for a double hung from Kolbe Kolbe. They are tilt in windows. The metal portion is what is cracked and broken. I am unable to find the model number on the window shoe.

Need part #1630008. Windows are from mid 70's

I am looking for a replacement part for this window. Any help is appreciated.

Best shots I can get. Color is off white or ivory. Window manufacturer (I think) is Milestone. I need a piece 29" long. Please call upon receipt of this email so I can place order for 2-balances and the bead.Lee

The tie bar clips broke on another of the 2003 Crestline Vinyl Crest windows. Do you have the part for this? For some reason the photos won't load. @2" tall, 1 1/2" wide, @5/8" deep. Vinyl material, "wings" on top and bottom, 4 screw holes, extension "prongs" which hold it away from window a bit. T ... (cont.)

Both upper+LOWER shoes (guides) are 15/16" wing to wing. Metal length 34" metal width 9/16" x 5/8"h bottom shoe depth is 1 1/16" marking 3360 BSI da

1/2" x 7/16" Do your company carry this product?