Viewing all customer Discussions for:

Door & Window

Hi I have vinyl double hung casement windows that apparently used to have original vent locks, many of which are missing. I'd like to order replacements, are the sizes fairly standard or do i need to measure each window? Also, the placement of these vent locks allow the window to open only about 2 ... (cont.)

Good morning I sent two photos of a double latch that I need. They are mounted in sliding doors. Also are there any lock cylinders that can be rekeyed for Schlage keys?

Here are the pictures I have of the rollers. I know it would be more helpful if the rollers were out of the door, but that is part of the problem. I have replaced rollers before and for the life of me I can't figure out how to remove them. There isn't a screw on the side next to the adjuster, and th ... (cont.)

Hello,Trying to locate the replacement pivot shoe for my vinyl double hung tilt windows. Not sure on window name or model.Shoe sizes are 9/16" thick2 1/8" tall1 1/4" wideI ordered part 15-152 thinking it would work but the part that the window locks into is different. On my pivot shoe it looks like ... (cont.)

I am looking to replace an exterior door handle for an Interstate series 3100 sliding glass door (see photo attached).

Looking for a casement window operator. Looks like a Detroit 2320. Is this still available or is there something that will work? Thanks

DRACO window locks. How could one simple lock have so many variations in size with the differences measured in 16ths? Tried replacing the locks thru the big block stores. Ha! no such luck. Help. I need nine locks.

I need the pictured top sash guide to use with my series 385 channel balances

The fixed panel is not part of frame. Pennco has closed and the door is 15 years old but works perfectly. I need to change the door to open on the right instead of the left. Any way to get hold of old mfg. drawings or manuals? Dan

Attached is a photo of the old operator. I do not know the brand name. Please advise if you have an identical one that would work.

Good morning, I have been searching your website for a replacement latch for my storm door and looks like you should have one that will work. I'll attach my info to see.Thanks for your help. Kelley

My roller matches your 1 and 1/4 inch roller: Product Code: 84-016. The problem is my tention screw spins but does not retract the pivot point that this product attaches to. I keep breaking the roller when attempting to install. Is there another roller that I may install that avoid the use of the br ... (cont.)

Hello , need 3 unit Channel Balances L- 29 Stamped # 28C

Attached are pictures with dimension of operator I am looking for, need between 10 and twenty but want to get one first and make sure it works

I Have Atrium window frames. Need Weep hole covers in beige also need frame paint in beige.

Looking for a replacement for this as the pins have snapped on both sides. It looks just like https://www.swisco.com/Pivot-Bar-2-3_4-inch/pd/Tilt-Window-Replacement-Sash-Pivot-Bars/26-125 but there are no flanges as the ends. Will this work? Thanks!

HiMy channel balances have broken strings so I need to replace them. Cant figure out the exact model. I have attached pictures of the ends and following are the details. Any help would be appreciated. Length 27 inchesWidth: 1/2 inchMarking on the balance reads: 26 5 Caldwell

Not sure which one I need. Bottom is 15/16 by 1 3/32. The metal is 30" long.

I have ALCON aluminum windows approx. 25 years old. The white plastic glazing strips (photos enclosed) has yellowed and cracked. They measure 1/2 inch by 5/16 inch. I'm looking for replacements glazing strips. In an earlier post you referenced part no. 55-092 as a replacement for an ALCON window but ... (cont.)