Viewing all customer Discussions for:

Door & Window

Looking for pivot pins for tilt in windows of unknown brand. The two from the bottom of the top sash both broke when my husband tried to force the window back in place when it was not in the proper alingnment in the pulley tracks. See attached images. Looks like the number 1529 in this piece. Both l ... (cont.)

This window is from 1989, there are no visible trademarks on window or scissor crank arm. When completely extended the window opens up appts 15" wide. Please let me know if you can supply part. thanks.

There are no visible company labels/ on the insulated glass band we determined that window is from 1989. On the crank arm there is the word TRUTH. Please let me know if you can supply new crank arm. thanks

hi was wondering if you can match this mortise door handle it has made in new Zealand on it the small lever with enables you to lock it form the inside is broken and it has locking barrels on both sides This however is not a must but it would be handy to make it a dead lock fron the inside ... (cont.)

these rollers are a pain to remove. please tell how and are the rollers still available. do i hav to remove the bottom part of the aluminium frame?

Hi, I need to replace the window balances for one of my window. Below are the info for the current channel balance: Metal length 28 5/8 in Metal width 9/16 in Stamp 28 5 BSI PM Window Weight 25.5 lb Please see the attached photos for the stamp, top, shoe. I am thinking about the following parts: ... (cont.)

I have a patio door lock that broke off and this lock is attached to the back of the sliding patio door. I would appreciate if you can help me to locate an identical part like the one in the pictures. Thanks

I am looking for a replacement kerf seal for my exterior Pella doors. I can not seem to find a replacement for this anywhere. The part is approximately 9/16 inch.

Need replacement pivot bar as 2 have snapped in half. Each have a number stamped on them that differs. One says ?2? and the other says ?6?. These are t style pivot bars that are 2 and 3/4 inch in length and the circular diameter appears to be 1/4 inch wide. The distance to the screw hole is 1.5 inch ... (cont.)

4 1/2 lnch by 1 inch wide 4 inch handle attaches to two long metal strips that attach to the window

I need 4 spiral balances for traco double hung tilt in windows. They measure 41". Hope you can help!

Roller for rolling patio door

Pivot bars are broken in one of my windows; couldnt find a perfect match for my broken one on your site. Are they interchangeable?

Double-hung tilt windows...when I wipe away the grease, the tip looks grey. Is there a balance with a grey tip or are they really white tips due to being 15 years old? They are 35 inches long and 3/8 diameter. Thanks for looking into my balance dilemma. I looked at the other grommet and it was GREEN ... (cont.)

What size screws for 70-208

Hi I'm looking to replace 2 balances. This is 1/2 inch by roughly 32.5.

The windows I'm working on are probably from the early 1980s. Our local window makers/installers don't carry parts for windows that old. Hoping you can suggest some adaptations. I'm willing to buy replacement shoes if necessary but reluctant to choose which ones since I lack knowledge. The cams on t ... (cont.)

Covers

No part numbers looks like 3/4 inch width 3 inch housing length. The screen door took parts that work with a hilite door. There is no brand on the door that I found.

Tip of the lever/handle broken on sliding door lock. I need to replace both lock mechanism and lever. On the lock it says; "I I Made in New Zealand" as you can read. I am looking for exact or replacement parts that can fit without changing door.