Viewing all customer Discussions for:

Door & Window

Hi there, I am a contractor going to do a New house build for my family. Our property is on the water and the township has some strenuous requirements for the windows and doors Making them quite expensive to factory order. I am considering ( I am an architectural woodworker) fabricating the windows ... (cont.)

I was wondering if this part can be confirmed just by looking at the pic and US PAT #. If so please let me know your thoughts. Taylor

I need some of the screen plunger pins as shown in the pic and on one window, the seal is gone on one side- included a pic of the side w the seal intact and the side without it as well as the info printed on the window for size.

Hello, need some help finding the replacement crank mechanism for a few windows where the cranking gear has come out of socket. Thank you.

I need help on identifying this glazing stop. It is dark brown or black. It is 1/2" on each side. At least get it close. Thank you,William

Hi, I just purchased a condo that's 16 years old. It was a rental and almost every window has channel balance issues. I'd like to start with one small window in the laundry room to see if I'm up to the job. These are PGT windows and the laundry room window channel balance is stamped "17 2." Me ... (cont.)

I have narrowed down that I need S380-29 for my windows, but have different sizes with stamps 28D and 28F. Can you tell me which stamp options for S380-29 correspond to these?

Im pretty sure this the size I need. what is your return policy if they're not the right size?

Need to buy a bunch of these "rivets" (not sure what to call them). Please see attached pic. How do I order?

am need of several parts for my discounted silverline "swing" windows. I would like a price for the following parts:8 - hinge leaf assembly part number 15.058 ( with screws to attach to window frame)1 - window balance (Right side balance 1320v) ( pls attach the top & bottom guides Part# 19.008 & ... (cont.)

Hello, I need to replace 1 dozen of these. Do you have these threaded rivets and rivet gun?

These pics and dimensions shown in one of the pics, are for a pivot lock shoe I need for a Pennco Window that is white vinyl with the lower part tilts in and removes. Upper portion is fixed. I will upload other pics of a tilt latch I also need for the same window.

This is a latch for our windows. House was probably built in 1980's. If you have any of these available we would like to purchase several. If not do you have any idea where we might find them? Thank you.

Hello, need a replacement vinyl sweep for my door. Couldn't find anything similar at Home Depot so I attempted to fashion my own (didn't work). See photo with a side view of the slot. Do you carry anything that would fit? Thanks!

I have a 1929 house. Not sure if the window is original. It is a double hung window with Spiral balancers. The spiral was covered in plastic that has now worn out. Window still work great - would prefer the spiral (spring) was covered. Do you sell a thing plastic cover that is about 1/2" in dia ... (cont.)

I need to replace both of these plastic pieces. The picture is the 'good' one. Okay, the broken one is missing the 'tit' (for lack of the proper word) that the 'pinchers' from the roller snap onto. I would like two of the plastic pieces & two of the rollers. I've measured and drawn a rough s ... (cont.)

I think the window were made by champion

I would really appreciate any help in identifying replacement parts for the lock in the pictures. The mortise broke off from the frame that mounted it to the door. Sliding glass door is from the 80's and I'm assuming it is original hardware. Thanks in advance!!

The Channel balance is 31. and the only code we can find is 30 3 DN CALDWELL. Can you identify the replacement we will need to order? Thanks, Tom

Looking for wheel assembly for a 50 year old Panaview slider. Wheels on this are 1-11/16th inch vinyl. Total height from top of assembly to bottom of wheel and track contact is 2"as shown in photo. Needing to find two. Thank you in advance. Michael