Viewing all customer Discussions for:

Door & Window

We need to replace 6 spring balances in our IWC windows, but they are not supplying these any longer. Can you provide these that will be compatible and at what cost for 6 springs? The part numbers in the photos are for the original and also for replacement springs, both of which fit. However, if t ... (cont.)

I broke off the part that holds the window in place (goes in to the open space). The second picture shows the triangular shaped piece that broke. The part measures about 13/136" Do you still sell these? -- Sorry, the pictures got rotated 90 degrees. Also, need to know how to remove this - it doesn' ... (cont.)

I have a vinyl window that the top window will not stay up. I took it apart and I found the metal piece from the window that goes into a plastic piece that's gets attached to the spring is broken. The metal piece from the window is broken. I attached some pictures. my name is Lance ... (cont.)

I believe this is the operator; do you have a replacement end that will fit?

Hi,I need two top sash guides and, two channel balances for my Kinco double-pane window (house is built in 1995). The channel balance is 29 inch long and has "28 5 HN CALDWELL" on it. The window is about 34 lb. I choose buy 29" Series 351 Channel Balance with 19-002 top attached 15-002 shoe attached ... (cont.)

Just wondering where I could get replacements for these?

I would like to know if you have my screen clip. I saw the 70-211 but wanted to know if you have anything closer to mine. Thank you.

Need a replacement Glaze.

I did weight window 24 lb . Stamp on balance 3635 I measured metal part balance @37 " about 5/8 wide I think I need 2 ( 3635 ) balances with upper and lower guides and 5 upper sash guides . I Need for other windows Just to let you know before the balance broke on left side of window it was al ... (cont.)

I am also looking for a replacement for the Anderson 7073. I need a couple of LH and RH setups. The existing window crank arms are only 7 1/2 inches long while yours are quite a bit longer. Any thoughts on if these will still work? Does anyone else have feedback on how these worked for their repl ... (cont.)

Tom, I have recently purchased a home. It has 2 8' sliders, identical. No markings on them that I can find other than the herculite stamps on the glass. I'm trying to adjust the rollers and it appears they have a hex/allen head key, but I have several sets of metric and standard and none ... (cont.)

I have a PGT 2500 series sliding glass doors and need to replace the internal lock set (one is keyed and two are non-key). Please tell me what will fit and what I need to order. Color is bronze (black). Thanks, Milan

Looking for white TOP SASH GUIDES that fit in ends of lower sash at check rail on single hung aluminum window Thx Bill

Need a replacement.

Hi, Can you id a replacement? Thank you.

On the frame of the balance there is a 28B stamped in it.

I am a Real Estate Broker and one of my sellers needs to replace a missing tilt window latch, right hand. The window brand is Alcoa. I do not have a picture to share and was wondering if 26-244 works on all Alcoa windows. Thank you, Barbara

Hello I am trying to help a friend find some replacement parts for his windows in his home in Japan. Picture a has a 2640 engraved on it model # 26-4 Picture b has 20 3 KO marked on it model # 20-3 picture c has 17 3 KO marked on it model # 17-3 picture d has 0830 marked on it

I am replacing a few old Silver Line window balances and thanks to your fantastic website and technician information, see that your 795 series would be the new replacement units. I have 2 questions before I order: 1) The markings on the old unit are 26-6. I'm assuming that's 26". I'm not sure on the ... (cont.)

Need replacement latches for tilt Windows. Latch block is 2 and 3/8 inches long and screw holes are 1 and 3/16 inches apart. Original manufactuer was flesher windows in fort Myers Florida.