Viewing all customer Discussions for:

Door & Window

Hi there, I have an older Stanley bifold mirror door set. The plastic round donut shape slide in the bottom track is broken and needs replacement (the pin is still fine). Do you have the plastic replacement piece? I am also happy to replace the pin if you have one that fits the same track an ... (cont.)

Original aluminum windows - house built 1997 Phoenix, AZ area. Gold label inside window says: Series 3722/3722F Name: A-161-1 MST 10050 ANA/AAMA/101-93 NFRC/100-91 The windows say ALENCO but the Alenco co. said they are not really their window brand - that the builder just used that. D ... (cont.)

Here are three pics of what I need to replace. This flexible vinyl piece is 1/2" on each side with a small notch on the side that snaps in along the window pane.

I need to order S380-37 Channel Balances. The stamp on the old balance says 3635, what stamp option should I order? Thanks, Tom

It is 2-1/2

Please see attached pic and let me know if you still have a 1" wide pivot lock shoe. I bought them before with your part number 15-184 on order #303201 on 7-27-2011. It appears that you no longer have that part number. Do you have a replacement? Thank you.

I have windows installed from 1984. There is a plastic piece on each side of the bottom sash that compress and hold down the balance spring rod. They are breaking left and right now allowing the spring balance rod to pop up through and the windows won

My windows need replacement tracks but both have been removed and discarded. So I have no numbers/series to go by. I have measured where the track would be, from plastic edges 29 3/4. Inside edge is 27. Is there a way to find out what size I need? Thank you! Christiane

My window channel balance has 23S stamped on it. which balance do I need?

The mortise lock in my patio door is no longer usable. It fell into the door. I have ordered and purchased a few different locks and all of them were too large. The last model ordered was the 82-218. The screw holes lined up but the body was too wide and the length was too long. The body of the lock ... (cont.)

could you please help me identify this window lock? I need 2 replaced. It goes on a sliding window and has 10R-6 on the handle

Bottom roller of sliding door screen

25 3 LO CALDWELL

I am in need of this part for a Pella Window. Please tell me if you can help me.

We have an older Sun Porch sun room on the back of our house. The door hinges have worn out. The parts for the hinges are metal but I found a set of plastic 'replacement' hinge pins on your website. Will they fit our hinges?

Hi, I hope you might be able to help me find a replacement for an old Arcadia sliding glass door handle. As you will see the handle and door frame has 3 holes- the outer two are 6 inches apart with a larger center hole. Best, Bolyn

Here are pictures of the Top Sash Guide that is missing. Let me know which one I need and I will submit order for 8 and 6 Take Out Clips. Thanks for your help.

I'm beginning to realize that there may not be a replacement for this setup. I'm looking for something that will require the least amount of modifications to my door. I'm fine with drilling a new hole to accommodate a narrower spacing.

who possibly made this sliding patio door lock... do you carry this item

wc-bc3-2730-7