Viewing all customer Discussions for:

Door & Window

I was wondering which part my exterior window would require

Attached are photos of a sheared off patio door handle w/ dimensions and two photos of an identical functional handle on same patio. Suspect brand to be Champion

Latch is broken of old SWISCO window. I was able to open and gently close it just fine without activating its auto lock future. The window was closed roughly and now it's auto lock future won't allow us to open it. i I need to replace it entirely

Hi, the sash balance says 11C, it's for a tilting double hung. It is 11" long.

Dimensions are included in drawing

Window glazing trim

Hello, we are looking for help with finding replacement cranks. We have two casement windows that need new cranks. They are part of a large triple window unit. The casements are on each side with a picture window in the center. So we are looking for a Right and a Left.

Hi, we'd like to be able to replace this part that broke. 30658 is labeled on the chain. We may need to replace the entire skylight operator. Thank you for your assistance.

Looking to replace this part with a same color as it no longer cranks the window open or closed. It's like the gears are stripped. Thank you, John

Ok. Thanks

I purchased and installed your S600-29 (Black tip) Spiral balance and I'm running into an issue where the window does go all the way up but, it doesn't stay up, it falls back down halfway. Do you know what the issue may be? There doesn't seem to be much tension in the balance to begin with to hold t ... (cont.)

Can you help

I have 20 year old windows. The marking on the balance springs say 28C USB. The width measures 1/2 inch. Can you recommend a replacement?

The balance metal portion is 28" in length. It has teh marking 27C BSI MJ on it. The plastic pieces have little wings on them.

I have these balances in my windows (attached mfr label). They are 32" x 1/2 inch I already purchased the following Product Code: 15-194 1" T-Lock Balance Shoe, Closed Cam from Swisco but they do not fit in the slot at the bottom as they are too thick to fit under the metal bar. The balances are ... (cont.)

This is from a sliding glass door on an auxiliary building at our house. The entire mechanism missing off the door. The square hole is where the mechanism on the door would come through the edge of the door And you can see the latch on the door frame In the other picture. Trying to find a mechanism ... (cont.)

I have this bottom seal for a door that needs to be replaced. I've never seen this style before. It clips in 1 side first then you snap in the other side. Big hollow chanel the length of the door. The company name was on a different door. May or may not have the same sweep. Not sure if it's the same ... (cont.)

Appear to be made by Wright. Two numbers visible: 6290B and 07867 The two connected parts are 4" long and the crossbar is 6" long. Circa 1985. Need about 6-7 of them. THANKS!

Please quote both the left and right side crank assemblies with screws if available

I need to identify and order replacement channel balances for a window. I believe it is a Milgard window. I will attach photos of the part. The metal piece is 13 and 5/8 inches. The plastic shoe is 1 and 3/32nd inches deep. Thanks for your help,