Viewing all customer Discussions for:

Door & Window

NEED TO REPLACE..HAVING TROUBLE IDENTIFYING CORRECT PART..HAVE ORDERED WRONG PART (39-259).

Looking to replace this piece only MADE IN NEW ZEALAND PAT.PEND.

I need parts for 2 Anderson narowline Windows. Windows were installed in 1986. I need both balances for one window. There are no markings on the balances. Another window needs new weather stripping for the bottom sash. Sash is 35 inches wide. Can you help? Measured at 6 3/4

See image, I need 2

Please identify the correct pivot set and color.

Looking for a replacement mortise lock for an Oran patio door. The outside length is 6 inches, and the interior length is 3 inches. Would you have something available? Thanks, Bob

I have 10 windows where the glazing beading was damaged during a hail storm. There are two sizes / width of various lengths The thinner is about 1/2" wide & snaps onto windows that open The wider is about 1-1/8" & snaps onto windows that do not open The color is "almond". Can I order len ... (cont.)

whats the difference between 40-209 and 40-207 door sweep?

I spoke to a rep this morning regarding replacement cranks for casement windows. These are the photos with the information. We need these cranks asap for an inspection.The width of the crank base is 5 5/16. The screws measure 4 1/4 center to center. The arm measures 3 inches. Actually, if I can get ... (cont.)

do you sell these? how much? lead time?

I need several of the parts in the photo. They are similar to your torque shaft bearing with product code 36-018G. They measure 7/8 distance between the holes and 5/16 thick but mine is only 1/2" inside diameter.

I am looking for a replacement for our Millard balancer. Please help.

Goes with balance 3x8 x 29 yellow. Shoe has white cam. I can't remove shoe at cut out as shown. Why?

See Attachment to show you the problem that I am having trying to repair my windows. Can you provide me with a correct Pivot Shoe 5/8" Part with no bump (hang down piece)? Or can this bump be shaved off to facilitate my windows? If you are going to answer for me to shave this bump off, what tool ... (cont.)

I need to order a replacement part of this inner sliding glass door lock.

our sliding screen door need all 4 corner piece please see pic I think i found the Part can you please double check if I ordered the right item ? the part was 95-227 Thank you very much Michael

Replacement parts for window: NFRC 100 CODE:R/W SPEC:NFRC SERIES:852 PW MST: 4040

discontinued aluminum lighthouse windows. side to side movement. pictures of windows, covers and holes with no covers. need 14 drain covers only, due to wasp problems. the number under barcode on white label which Simonton used is 9063786/02. thank you.

These are for a "Great Lakes" premier patio screen. There are 2 roller units on top and 2 on the bottom. There is a screw adjustment for the amount of pressure applied. They mount with a screw at each end of the roller assembly. The Great Lakes company recommended your company. I would appreciate an ... (cont.)

Not sure of the brand on these operators. One is a dual arm split arm and the other is a split arm. Sizes are written on the photos. Thanks for your help!