Viewing all customer Discussions for:

Door & Window

I am trying to replace a top sash balance for a Weathershield Double Hung Tilt Window due to a broken spring. The balance is a beige channel 25" long, 9/16" wide, and 5/8" deep. It has the short S-clip. The stamp is "24" with no other digits or letters. The upper sash weighs 14.2 pounds. I ha ... (cont.)

Hello I purchased a 39-031,but it doesn't match what I have. Please see photo attached. Looking forward to hearing from you. I've used these on other windows and they worked great. Thanks Fran

Looking at matching the balancer out of my JeldWen window. It looks almost identical to your 751 ribbed balancer and has a marking of 28HB and 3.S.I on the balancer. Thought that was your nomenclature but must not be since the unit is 30-5/8" long. I initially thought that would equate to your 28H ... (cont.)

My double hung, double glass window has 3/8" diameter balances. The tube is vinyl? and has no color cap on the bottom of the balance. What is your suggestion for my replacement balance choice? My home is approximately 20 years old, and I have no idea what brand windows were installed. Thank you, ... (cont.)

Broken in the closed position. Looks like p/N 38-095 would work. I took more accurate measurements and it looks similar per your diagram. Please confirm this for me. Thank You!

I'm having a difficult time finding balances for the old Hallmark window my problem is the bottom shoe on the Hallmark balances wit is less than an inch it's probably 15 16.

This lock has failed. I would like to replace it. More photos upon request PAT #: 6,264,252

The piece that goes against the window is one half inch high. The piece from the window to the front of the frame is 5/8 to 11/16 th of an inch. The diagonal is 3/4 of an inch.

Screen door is at least 20 years old. Wheel diameter: 1"t Length from wheel to flange: 2" Height" 1 7/8" bottom to top of flange

I removed this assembly from a working door. Yes it is rusty but it works. I looked on the website but I could not find an exact match. Can you please review the photos and let me know which assembly will work. Has some markings on it DEL MAR ENG. LONG BEACH, CA PAT 3,670,357 Thank You Bil ... (cont.)

I purchased the S385-29 but they do not fit. The shoe is too large. What do I need to get? Photos show the balance I received compared to my originals.

Trying to match this swivel key. The only marking on it is the upside-down v shape in the zoomed in picture in the corner circle. This is from a storm door sliding glass section. The pieces you slide to raise the glass says Keller on it. The width is 3/32 the best I can tell and the height of the s ... (cont.)

Unknown brand top sash guide

Hi! Trying to find a replacement for this handle.

Dear Technical Assistance Person(s), I need your help to try to identify a replacement for our worn Sliding Window Rollers. Attached are (2) photos and rough dimension drawing of the existing mechanisms (cage + rollers). Please suggest all possible options for replacement, or upgrades (such as ... (cont.)

I was wondering if you carry a roller clip as shown. It clips to the top of a window balance. If you do not have this, do you have any ideas what this particular part will be called?

Hi, I have this squarish shaped window glazing/beading on all my homes windows and it is all brittle and breaking after 20 years. I need a replacement product. It does not need to be exactly the same, it just needs to cover the glue where the window is attached to the frame. Thank you for your h ... (cont.)

I do not know what type of sliding door I have but I wanted to add a key lock to my sliding door. It would seems that part #82-315 would be the best fit. Can you confirm by the picture, if this would work. Thanks Mike

I think my operator is more than 50 years old. It's about 9" from the end of the arm to the axle on the rotator.

I am looking for replacement hardware for my windows. I attached pictures of the hardware. I need two that open a casement window to the right and two that open to the left. There is a engraved number on the extending arm OP05-2020 U There is a stamped number on the bottom OP05-7565 and the da ... (cont.)