Viewing all customer Discussions for:

Door & Window

I need a part for a roto roof window. It's the handle to open and close the window. It's truth 45013. Do you have anything that will work to make window functionable? I have a pic to help find this part. I need two of these. Will your part 39-379 work?Please contact me by phone or email with any qu ... (cont.)

Hi. Based on my measurements, it looks like part# S380-29 is what I need. My question is what stamp options do i need to select? The picture I attached shows 28D USB printed on it. Thanks

I have a window that won't open/go up; I removed the bottom sash and looked in the track. I think I need replacement shoes. The first pic shows the shoe part but the balance is not attached to it. The second pic shows other side of window; looks like shoe piece is broken at top and nothing for balan ... (cont.)

Is there installation guide for Product Code: 84-229? Specifically, I am curious how to position that round plastic piece (white)? It won't secure tightly with this piece for some reason...

looking for a replacement. window will not stay open. pivot bar brole off at the end

In as much as you helped me several years ago with repair parts can I'm seeking your assistance one more time can you I'd the part and do You have the material in stock tan in color

Dimensions are about 1/2: depth, 2 " length, 1 1/4 " wide. Do not need balance tube assembly. Any idea on a part that would work?

Need some help, my pivot window will not stay up. It looks like I have a couple of broken plastic parts that the spirals latch onto. Can you review and let me know if the pictures are good enough to establish what parts they are.

I am looking for a replacement window sashe balance, the only markings I see on the unit are 11600-17 R27 89. I have not removed them yet, these are the only ones I can see with it in place. Thanks for your help.

We bought 3 used windows and they don't have the tracks.

Hi - I can't find any latch that matches what we have. Everything available seems to have a reach out latch that extends into the jam. Our door slides inside one of the stationary panels and latches to the interior of that fixed panel. Do to salt air, everything is corroded quite a bit and should be ... (cont.)

Sash stamped with: 29 9 IR CALDWELL Need replacement. Thanks.

Window lock and keeper 1-5/8" and a handle with holes at 3/4", 2" and 3-5/32" from L to R (handle is 4" wide and 1-1/8" high) All pieces are flush, not recessed. I would like matching white or silver parts.

I have a 13 9 GX CMC 7 channel. I have measured everything and found that I need a 14" 385 channel with the 15-004 shoe and 19-005 top (correct me if I'm wrong) however when it comes to the stamp option, I'm not sure which one I should order. I weighed the window that will be moving up and down (I' ... (cont.)

The piece that locks the window is stiff. Do we need to replace the entire lock or just the lever that locks the window

I have two Anderson windows, the white plastic piece (shown in second picture) broke and I need to replace it. Is there a replacement part for this?? Thanks Malari

Hello I am in need of a PENNCO sash lock for a window. The measurement between screws is 3 1/4". Similar to your 90-005. Thanks D Muma

Vinyl track for screen door has deteriorated and is cracking! The door is a 10 foot siding French door. The measurement of the piece needed is about 115" long!

Hi, I have a lot of Pella casement windows (architect series?). I want to replace the visible gray hardware with new white hardware. Please advise on my choices. Thank you! Jack

What replacement balance should I order for an Anderson sash balance that has the numbers 11600-17 and BD3-7#27-584 stamped on it? Thanks.